Operator`s manual

AUTOLOCKCHUCK

See Figure 6.

Bits can be changed quickly using the auto lock chuck

feature. In auto lock mode, the chuck jaws open when

the direction of rotation selector is set for reverse rotation

and the switch trigger is depressed. The chuck jaws close

when the direction of rotation selector is set for forward

rotation and the switch trigger is depressed.

DRILL AUTOLOCK

°°°, \ / \

'6° 8e10o14)

AUTOLOCK

SELECTOR

Fig. 6

TWO-SPEED GEAR TRAIN

See Figure 7.

The drift has a two-speed gear train designed for drilling or

driving at LO (t) or Hi (2) speeds. A slide switch is located

on top of the drift to select either LO (1) or Hi (2) speed.

When using drift in the LO (1) speed range, speed will

decrease and unit will have more power and torque. When

using drift in the HI (2) speed range, speed will increase

and unit will have less power and torque. Use LO (1)

speed for high power and torque applications and HI (2)

speed for fast drifting or driving applications.

TW0-SPEED

GEARTRAIN(HI&0)

SPEED

Fig. 7