Operator`s manual

m Insertthe hex key into the chuck and tighten the
chuck jaws securely. Tap sharply'_ith a mailer in a
counterclockwise direction. This will ioosen the chuck
on the spindle° It can now be unscrewed by hand.
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and deveJop
a wobbte Also, the chuck screw may become loose,
causing the chuck jaws to bind and prevent them from
closing. To tighten:
m Lock the switch trigger by p_acing the direction of
rotation selector in the center position.
Open the chuck jaws.
m Insert the hex key _nto the chuck and tighten the chuck
jaws securely° Tap the hex key sharpJy with a mallet in
a clockwise direction. This will tighten the chuck on the
spindle.
el Open the chuck jaws and remove the he× key.
m Tighten the chuck screw.
Fig. 17
BATTERIES
The battery pack for this tool is equipped with nickel-
cadmium rechargeable batteries. Length of service from
each charging will depend on the type of work you are
doing.
The batteries inthis tool have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out° Do net disassemble battery pack
and attempt to replace the batteries° Handling of these
batteries, especially when wearing tings and jewelry, could
result in a sedous burn.
To obtain the longest possible battery life, we suggest the
rot'lowing:
Remove the battery pack from the charger once it is
fully charged and ready for use.
For battery pack storage longer than 30 days:
u Store the battery pack where the temperature is below
80°F.
ill Store battery packs in a "discharged" condition.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natura! resources, please
recycle er dispose of batteries
properly°
This producL contains n[ckeFcadmium
batteries. Local, state or federal
(aws may prohibit disposal of n(ckef-
cadmium batteries in ordinary trash,
Consult your local waste authority for information
regarding avalfable recycling and/or disposal options,
_, WARNING: Upon removal, cover the battery pack's
termfnats with heavy-duty adhesive tape, Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children_ Failure to comply with these
warnings coutd resutt infire and/or serious injury,
17