Operator`s manual

KNOW YOUR DRILL-DRIVER
See Figure 1.
Before attempting to use this product, familiarize yourself
with aff operating features and safety rufes_
AUXILIARY HANDLE
Your ddll is equipped with an auxiliary handle for ease of
operation and to prevent loss of control_
BIT STORAGE
Bits provided with the dflll-ddver can be placed in the
sLorage area, located on the base of the drill
DIRECTION OF ROTATION SELECTOR
FORWARDtREVERSEiCENTER LOCK
Your drill has a direction of rotation (forward/reverse)
selector located above the switch tdgger for changing the
direction of bit rotation° Setting the switch trigger in the
OFF (center lock) posftion helps reduce the possibility of
accidental starting when not in use.
KEYLESS CHUCK
The keylesschuck allowsyou to hand-tighten or release
the drill bit inthe chuckjaws.
LED WORKLIGHT
The LEDworkligh_;,3oca_edon the front of the toolbase,
illuminateswhen the switch trigger isdepressed°This
providesextra fightfor increasedvisibirity
LEVELS
Levels are located on the top and end of the motor
housing to hetp keep the drill bit level during use°
TWO-SPEED GEAR TRAIN
The two-speed geartrain Is designed for drilling or driving
at LO (1)or HI (2)speeds. A slide switch is located on top
of your drill for selectingeither LO (1)or HI (2)speed.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and tower speed with
decreased trigger pressure.
UNPACKING
This product has been shipped completely assembled.
B Carefully remove the tootand any accessories from the
box. Make sure that all items listed in the packing list
are included.
ml Inspect the tool carefully to make sure no breakage or
damage occurred during shipping,,
m Do not discard the packing material until you have
carefully inspected and satisfactorily operated _he toot.
= Ifany parts are damaged or missing, please call
1-80D-932-318B for assistance,
PACKING UST
1/2 in.Drill with AuxiliaryHandle
Double-ended Bit (2)
Operator'sManual
A
A
WARNING: if any parts aredamaged ormissing do
not operatethis tooluntilthe damaged or missing
parts are rep[acedoFailureto do so could resuftin
possibleseriouspersonal injury°
WARNING; Do not attempt to modify this tool
or create accessories not recommended for use
with this tool Any such alteration or modification is
m_suse and could result in a hazardous cond{tion
leading to possible serious personal Injury.
WARNING: To prevent accidental starting that
could cause serious persona! injury,always remove
the battery pack from the toot when assembling
parts.