Operator`s manual

Fig.9
Tousethe Prestavalve adaptor:
[] Loosen Presta valve locking nut.
[] Thread Presta valve adaptor onto valve stem with larger
open end toward wheel.
[] Clamp the end of the air chuck down onto the Presta
valve adaptor by pressing air chuck clamp down until it
locks into place.
[] After inflation, (See switch trigger) remove air chuck and
tighten locking nut.
TO _ _ TO
LOCK _.._. '_ _ /A UNLOCK
(
PBESTA
VALVE
Fig. 10
LARGE ADAPTOR
TAPEREDADAPTOR ATTACHMENTKNOB
VALVEADAPTOR TO | L -_
/ LOOSEN ( _'/
TAPEREDADAPTOR Fig. 11
HiGH VOLUME ADAPTOR
See Figures 11 - 12.
The high volume adaptor can be useful in inflating small,
low pressure items such as beach balls and children's
toys.
Like most adaptors provided for the handheld inflator, the
high volume adaptor can be used either with or without
the air hose and air chuck.
_HUCK
TOUNLOCK
MAIN ADAPTOR
<-
PINCH
VALVEADAPTOR
LARGE
TAPERED ADAPTOR
SMALL TAPEREDADAPTOR
Fig. 12
In order to use the high volume adaptor, you must first
install the main adaptor onto the handheld inflator or air
chuck, and then fit the appropriate adaptor onto the main
adaptor.
To use without the air hose:
[] Remove battery pack from handheld inflator.
[] Loosen adaptor attachment knob slightly by turning
counterclockwise.
[] Insert the end of the main adaptor into the open end of
the handheld inflator.
[] Push main adaptor inward until it stops.
[] Tighten adaptor attachment knob by turning clockwise.
[] Attach desired adaptor.
[] To remove, turn adaptor attachment knob counter-
clockwise and remove adaptor(s).
To use with the air hose:
[] Insert main adaptor into air chuck and push air chuck
clamp down until it locks into place.
[] Attach desired adaptor.
[] To remove, lift air chuck clamp up and remove
adaptor(s) from air chuck.
13