PERATOR'S MANUAL T ® 3 in. × 21 in. BELT SANDER VARIABLE SPEED DOUBLE iNSULATED Model No. 315.117271 A WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.sears.
[] Warranty .......................................................................................................................................................................... 2 [] Introduction ..................................................................................................................................................................... 2 [] General Safety Rules ...................................................................................................................
A WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE WORK INSTRUCTIONS AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. [] Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
SERVICE [] Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. [] Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the cutting tool "live" and shock the operator. [] Know your power tool. Read operator's manual carefully.
Someofthefollowingsymbolsmaybeusedonthistool.Pleasestudythemandlearntheirmeaning. Properinterpretation ofthesesymbolswillallowyouto operatethetool betterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Am pe res Current Hz Hertz Frequency (cycles per second) W Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic no No Load Speed Rotational speed, at no load [] Class II Construction Double-insulated ...
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsofriskassociated withthis product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous result in minor or moderate injury.
DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. A WARNING: The double insulated system is intended to protect the user from shock resulting from a break in the tool's internal insulation.
PRODUCTSPECIFICATIONS BeltSize.......................................................... 3 in. × 21 Sanding Surface ............................................... No Load Speed .......................................... in. 16.5 sq. in. Input ................................ 120 V, 60 Hz, AC only, 8.5 Amps Net Weight ................................................................ 11 Ibs. 800-1,300/rain.
KNOWYOURBELTSANDER TENSION See Figure 1. The tension release lever aids in quick and easy belt changes. Before attempting to use this product, familiarize yourself with all operating features and safety rules. DUST BAG The dust bag attaches to the sander and keeps dust to a minimum. TRACKING DESIGN The design of the sander provides for easy handling. It is designed for comfort and ease of operation in different positions and at different angles.
,_ TENSIONRELEASE LEVER WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. A A WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. \ \ WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool.
iNSTALLUNiDiRECTiONALBELTSiN THE DiRECTiONOFTHE ROTATION iNSTALLBiDiRECTiONALBELTSiN EITHERDiRECTiON Fig. 4 Fig. 5 WARNING: Before connecting the sander to a power supply, always make sure it is not in the "locked-on" position. Failure to do so could result in accidental starting of the sander resulting in possible serious injury. ADJUSTING SANDING CAUTION: If the sanding belt wears excessively on the inner edge, it is probably adjusted too far inward and is rubbing against internal parts.
USING THE DUST BAG [] Unplug the sander. [] Remove the dust bag from the sander. The dust bag provides a dust collection system for the sander. A [] Unzip the dust bag. [] Shake out the dust. WARNING: Do not use the dust bag when sanding metal. Using the dust bag when sanding metal creates a fire hazard, which could damage the tool and lead to serious personal injury. ATTACHING THE DUST See Figure 7. [] Zip up the dust bag. [] Replace the dust bag.
PROPERHANDPLACEMENT [] Move the sander slowly over the work surface, using the rear handle to control the sander and the front handle to guide the sander. See Figure 9. For ease of operation and maintaining proper control, the sander has a front handle and a rear handle. These NOTE: Allowing the sander to remain in one place will result in an uneven surface.
SETTING THE BELT SANDER SPEED The sander has a variable speed control dial, A to F, designed to allow operator control of belt speed. To increase belt speed, turn the variable speed control dial to a higher setting. Turn to a lower setting to decrease belt speed. Refer to the chart below for proper speed selections.
,,- CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117271 SEE NOTE 11 12 5 I0 \ 3 14 NOTE: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Sears repair center. Contact your nearest Sears retail store for service center information.
_, CRAFTSMAN i BELT SANDER - MODEL NUMBER 315.117271 J The model number will be foundregarding on a plate attached to the motor housing. Always mention number in all correspondence your BELT SANDER or when ordering repair parts. the model SEE BACK PAGE FOR PARTS ORDERING | INSTRUCTIONS PARTS LIST Key No. 1 Pa_ No. Description 940211009 Logo Plate ............................................................................................................. 1 Sanding Belt ...................
