Operator`s manual

[] Beforeturningonthesaw,performadryrunofthecut-

tingoperationjustto makesurethatnoproblemswill

occurwhenthecutis made.

[] Graspthesawhandlefirmlythensqueezetheswitch

trigger.Allowseveralsecondsforthebladeto reach

maximumspeed.

[] Slowlylowerthebladeintoandthroughtheworkpiece.

[] Releasetheswitchtriggerandallowthebladeto stop

rotatingbeforeraisingthebladeoutoftheworkpiece.

Waituntiltheelectricbrakestopsbladefromturning

beforeremovingtheworkpiecefrommitertable.

SUPPORTLONG WORKP(ECES

See Figure 38.

Long workpieces need extra supports. Supports should

be placed along the workpiece so it does not sag. The

support should let the workpiece lay flat on the base of

the saw and work table during the cutting operation. Use

the work clamp or a C-clamp to secure the workpiece.

45°X 45°COMPOUNDMITERCUT

Fig. 4O

LONGWORKPIECE

ROLLER

SUPPORT

Fig. 41