Owner's manual

FEMURES
CARRYING HANDLE
See Figure 4.
For convenience when carrying or tiwisporting your
miter saw from one place to aitother, a carrying
handle has been provided on top of the saw arm as
shown in figure 4. To transport, turn off and unplug
your saw, then lower the saw arm and lock it in the
down position. Lock saw arm by depressing the lock
pin.
LOCK PIN
CARRYING
SAW
ARM
MITER LOCK
HANDLE
SAW ARM
LOCKED IN DOWN POSITION
Fig. 4
MITER LOCK HANDLE
See Figure 4.
The miter lock handle securely locks your saw at
desired miter angles.
LOCK-OFF LEVER
See Figure 5.
The switoh trigger is equipped with a lock-off lever to
reduce the possibility of accidental starting. TTie lock-
off lever must be pressed down with the palm of your
hand to turn saw on. The spring loaded lever will
spring back into the lock-off position when the switch
trigger is released.
SPINDLE LOCK BUTTON
See Figure 5.
A spindle lock button has been provided tor locking
the spindle which keeps toe blade in your saw from
rotating. Depress and hold toe lock button while
installing, changing, or removing blade only.
TRIGGER LOCK
See Figure 6.
To prevent unauthorized use of your compound miter
saw, we suggest that you disconnect it from the power
supply and lock the switch in the off position. To lock
the switoh, install a padlock through the hole In toe
swritch trigger. A lock with a shackle up to 13/64 in.
diameter may be used. When toe lock is installed and
locked, the switch is inoperable. Store the padlock key
in another location.
SWITCH
TRIGGER
Fig. 6
11