User guide

TOOLS NEEDED
The following tools are needed for assembly and alignment. Note: The four hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
3^ in. NUT DRIVER
\
SOCKET WRENCH
WITH 7/16 in. SOCKET
m
COMBINATION
— SQUARE
FRAMING SQUARE
r«'li|iiT/mn|i|iiriii
ttv| 1111 n H > 11| 11 ■ 11 r«'|' 1111 f »1 H 1111 H r 11| n i| 11 n 11111,
11 till I 111 ilililitil.il 1.1.1.i.l.l.l.t.l.i, 1.1 J.t.l.i -
ADJUSTABLE WRENCH
€ S i
3/16 in. HEX KEY
5/32 in. HEX KEY
1/8 in. HEX KEY
3/32 in. HEX KEY
FLAT BLADE
SCREWDRIVER
3/4 in. —
WRENCH
- -
Figure 4
CRRFTXMRN' TABLE SAW 315.228110
12