Manual

TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Rip fence does not move smoothly.
1. Rip fence is not mounted cor
rectly.
2. Rails are dirty or sticky.
1. Remove and reposition the rip
fence. See Aligning Rip Fence
and Front Rail in the Assembly
section.
2. Clean and wax the rails.
Wood edges away from rip fence
when ripping.
1. Rip fence is misaligned.
1. See the Assembly section for
Checking Rip Fence and Blade
Alignment and Aligning Rip
Fence and Front Rail
procedures.
CRflFTSMftN TABLE SAW 315.228390 46