Operator`s manual

UNPACKING
This product requires assembly.
• Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
• Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
_i WARNING: If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
A
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
21
18
PACKING LIST
1. Router table top (1)
2. Miter gauge knob (1)
3. Washer (1)
4. Miter gauge (1)
5. Hex key (1)
6. Bar (1)
7. Switch box assembly (1)
8. Guard post (1)
9. Cutter guard assembly (1)
10. Undertable guard (1)
11. Carriage bolt (2)
12. Socket head screw (16)
13. Lock washer (19)
14. Flat head machine screw (3)
15. Small screw (2)
16. Starting pin
17. Pan head machine screw (2)
18. Fence assembly (1)
19. Fence lock knob (2)
20. Throat plate (5
21. Table leg (4)
22. Rear safety guard (1)
23. Socket head screw (3)
Operator's Manual (not shown)
1
2O
18 3
15 13
10
23 _ 11
12
22
o r-'-
5
Fig. 2
10