Owner`s manual

FULL ONE YEAR WARRANTY ON CRAFTSMAN INDUSTRIAL ELECTRIC DRILL
If thisCraftsman Industrial Electric Drill failsdue to a defect in material orworkmanship withinone year fromthe date
of purchase, Sears will repair it, free of charge.
WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE
IN THE uNrrED STATES.
This warranty gives you specific legal rights,and you may also have other rightswhich vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffrnan Estates, IL 60179
INTRODUCTION
DOUBLE INSULATION is a concept in safety, in electric
power tools, which eliminates the need for the usual three
wire grounded power cord and grounded suppty system,
Wherever there is electric current in the tool there are two
complete sets of insulation to protect the user. AiI exposed
metal parts are isolated from internal metal motor compo-
nents withprotecting Insulation.
IMPORTANT - Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service we suggest you return the tool to your nearest
Sears Store for repair. Always use original factory replace-
ment parts when servicing.
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL. Read owner's
manual carefully. Learn its applications and
limitations aswellasthe specificpotentialhazards
relatedto thistool.
2. GUARD AGAINST ELECTRICAL SHOCK by
preventingbody contactwithgroundedsurfaces.
Forexample:Pipes,radiators, ranges,refrigerator
enclosures.
3. KEEP GUARDS IN PLACE and Inworkingorder.
4. KEEPWORK AREA CLEAN. Clutteredareas and
benchesinviteaccidents.
5. AVOID DANGEROUS ENVIRONMENT. Don'tuse
powertoolin damp orwet locationsor exposeto
rain.Keepwork area well lit.
6. KEEP CHILDREN AND VISITORS AWAY. All
visitorsshouldwear safety glassesand be kepta
safe distancefrom work area. Do not let visitors
contacttool orextensioncord.
7. STORE IDLE TOOLS. When not in use tools
shouldbe stored in a dry and highor locked*up
place- outof the reach of children.
8. DON'T FORCE TOOL It will do the job better and
safer at the rate for which it was designed.
9. USE RIGHT TOOL. Don't force small too_ or
attachment to do the job of a heavy duty tool. Don't
use tool for purpose not intended - for example - A
circular saw should never be used for cutting tree
limbs or logs.
10. WEAR PROPER APPAREL. Do not wear loose
clothing or jewelry that can get caught in tool's
moving parts and cause personal injury, Rubber
gloves and non-skid footwear are recommended
when working outdoors. Wear protective hair
covering to contain long hair and keep it from being
drawn into nearby air vents.
11. ALWAYS WEAR SAFETY GLASSES, Everyday
eyeglasses have only impact-resistant lenses; they
are NOT safety glasses.
12. PROTECT YOUR LUNGS. Wear a face mask or
dust mask if operation is dusty.
13. PROTECT YOUR HEARING. Wear hearing
protection during extended periods of operation.
Page 2