Owner's Manual Ir P.l:l FTSMI:1 N'l 3/8 in. DRILL Reversible Double Insulated 315.101030 Model Nos. 315.101030 315.101040 315.101050 315.101040 315.101050 Save this manual for future reference _, CAUTION: Readand follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: Safety Features Operation Maintenance Parts List 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.Sears.
• Table Of Contents .......................................................................................................................................... 2 • Warranty ......................................................................................................................................................... 2 • Introduction .....................................................................................................................................................
,_ WARNING: Read and understand all instructions. Failure to follow all instructions listed • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. • Avoid before on the switch below, may result in electric shock, fire and/or serious personal injury. SAVE THESE Work INSTRUCTIONS Area accidental starting. Be sure switch is off plugging in.
| Service When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual, Use of Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.
Important:Someofthefollowingsymbolsmaybeusedonyourtool.Pleasestudythemandlearntheirmeaning. Properinterpretation ofthesesymbolswill allowyouto operatethetoolbetterandsafer.
Chuck: 101030 101040and101050 Capacity Rating: 101030 101040 101050 ,_ NoLoadSpeed 101030 101040 101050 Switch: 101030 101040and101050 3/8in. ChuckwithChuckKey 3/8in. KeylessChuck 1/16in. to3/8in. 120volts,60Hz,AConly 4.6Amps 4.8Amps 5.0Amps WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
KNOW YOUR ELECTRIC DRILL APPLICATIONS See Figure 1. (Use only for the purpose listed below) Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and laminates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits. • Mixing paints. ELECTRICAL CONNECTION Your drill has a precision built electric motor.
MODEL 315.101040 VARIABLESPEEDWITH 3/8 in, KEYLESSCHUCK KEYLESS CHUCK FORWARDREVERSESELECTOR SELECTORIN CENTERPOSITION (LOCK) BUTTON VARIABLESPEED SWITCHTRIGGER Fig. I (b) MODEL 315.101050 VARIABLESPEEDWITH3/8 in, KEYLESSCHUCK KEYLESS CHUCK FORWARDREVERSESELECTOR SELECTORIN CENTERPOSITION (LOCK) LOCK-ON BUTTON VARIABLESPEED SWITCHTRIGGER OVERMOLD ON HANDLE Fig.
REVERSIBLE _h, WARNING: Your drill should never be H connected to power supply when you are assembling parts, making adjustments, installing or removing drill bits, cleaning, or when not in use. Disconnecting your drill will prevent accidental starting that could cause serious personal injury. See Figure 3. See Figure 2. This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger.
VARIABLE SPEED (Models 315.101040 See Figure 4. CHUCK KEY (Model See Figure 5. and 315.101050) 315.101030) A chuck key has been provided for use when installing or removing bits. It is also used when removing the chuck. (See chuck removal section). If you have one of these models, your drill has a variable speed switch designed to allow operator control and adjustment of speed and torque limits. The speed and torque of your drill can be increased or decreased by depressing the switch trigger.
_ WARNING:Donotholdchuckbodywith one hand and use the power of your drill to tighten the chuck jaws on your drill bits. The chuck body could slip in your hand or your hand could slip and come in contact with a rotating drill bit. This could cause an accident resulting in serious personal injury. TO INSTALL On model 315.101030 tighten chuck jaws securely, using only the chuck key provided. • On models 315.
REMOVING • _k BITS When drilling metals, use a light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase the drilling action. Unplug your drill. If the bit jams in workpiece or if the drill stalls, stop the tool immediately. Remove the bit from the workpiece and determine the reason for jamming. WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. • On model 315.
LEVEL DRILLING TO RETIGHTEN See Figure 10. A convenient new feature provided with your drill is a level. It is recessed in the motor housing on top and end of your drill. It can be used to keep drill bits level during drilling operations. The chuck may become loose on spindle and develop a wobble. A LOOSE CHUCK To tighten, follow these steps: • TOPVIEW Unplug your drill. WARNING: Failure to unplug your drill could result in accidental starting causing serious injury.
,_ LUBRICATION WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required. GENERAL EXTENSION CORDS Only the parts shown on parts list, page 15, are intended to be repaired or replaced by the customer.
CRAFTSMAN 3/8 in. DRILL MODEL NOS. 315.101030 I / 315.101040 / 315.101050 ! The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. DRILL or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING | 1 INSTRUCTIONS 2 3 2 4 MODEL 315.101030 3 MODELS 315.101040 AND 315.101050 PARTS LIST Part Number Description Item 9-2975 Chuck (Model No. 315.101030) ..........................................
For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM EsMAnytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night SEARS HomeCentra/_° ® Registered © Sears, Roebuck and Co.
