Manual

KNOW YOUR ELECTRIC DRILL

See Figure 1.

Before attempting to use any tool, familiarize yourself

with all operating features and safety requirements.

ELECTRICAL CONNECTION

Your drill has a precision built electric motor. It should

be connected to a power supply that is 120 volts,

60 Hz, AC only (normal household current). Do not

operate this tool on direct current (DC). A substantial

voltage drop will cause a loss of power and the motor

will overheat. If your drill does not operate when

plugged into an outlet, double-check the power

supply.

APPLICATIONS

(Use only for the purpose listed below)

• Drilling in wood.

• Drilling in ceramics, plastics, fiberglass, and

laminates.

• Drilling in both hard and soft metals.

• Using driving accessories, such as driving screws

with screwdriver bits.

• Mixing paints.

MODEL 315.101030

SINGLESPEEDWITH3/8in.CHUCK

CHUCK

SELECTORIN

CENTERPOSITION

(LOCK)

FORWARD-

REVERSESELECTOR

LOC_ON

BUTTON

SWITCH

TRIGGER

CHUCK

KEY

Fig. 1 (a)

_ WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of

a second is sufficient to inflict severe injury.