Manual

PLUNGE cUTrlNG

See Rgums 22.23.

_L WARN|NG: Ahvaysadjust bevel se_ng to zero

before makinga plungecut.Attempting a plunge cut

at any other settingcan resuff inioss of control of the

saw possibly causingseriouspersonal injury,

m Adjust the bevel setting tozero,

m Set the blade to the correct blade depth setting°

E Swing the lower blade guard up using the lower blade

guardhandle.

NOTE;Always raise the lower blade guard withthe

handleto avoid seriouspersona]injury.

= Hold the lower blade guardby the handle.

E Restthe front ofthe baseflat againstthe workpiece

with the rear of the handle raisedso the bladedoes not

touchthe workpiece.

m Start the sawand let the bladereach fut[ speed.

m Guide the saw into the workp}eceand makethe cut_

,_IIL WARNING: Ahvayscutinaforward dire_ionwhen

pfungecutting.Cutting inthe reversedirectioncould

causethesawto climb up onthe workpleceand

back toward you.

[] Release the switch trigger and allow the blade to come

to a complete stop.

[] Lift the saw from the workpiece.

[] Clear corners out with a hand saw or sabre saw.

_ll= WARN|NG: Nevertiethe lowerblade guard ina

raised position, Leavingthe blade exposedcould

lead to seriouspersonal Injury,

LOWERBLADE

GUARD

PLUNGE

CUT

Fig, 22

Fig 23