Manual

d_lLWARNING:Donotallowfamiliaritywithtoolsto
makeyoucareless.Rememberthatacareless
fractionofa secondissufficientto inflictserious
injury.
_ WARNING:Alwayswearsafetygogglesorsafety
glasseswithsideshieldswhenoperatingtools.
Failuretodosocouldresultinobjectsbeingthrown
intoyoureyes,resultinginpossibleseriousinjury.
APPLICATIONS
Youmayusethistoolforthefollowingpurposes:
[] Sawingnon-ferrousmetal,sheetsteel,wood,plastic,
andsimilarmaterials
[] Cuttingwoodsurfaces
[] Cuttingthinsheetmetal
[] Cuttingplasticsandlaminates
ThisproductwillacceptDieHard_19.2Vlithium-ionbat-
terypacksandCraftsman19.2Vnickel-cadmiumbattery
packs.
Forcompletecharginginstructions,referto theOperator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
TO INSTALL BATTERY PACK
See Figure 2.
[] Lock the switch trigger by placing the rotation selector
in the center position.
[] Place the battery pack on the tool.
[] Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured on the
tool before beginning operation.
CAUTION: When placing the battery pack in the
tool, be sure raised rib on battery pack aligns with
the groove in the tool and that the latches snap into
place properly. Improper assembly of the battery
pack can cause damage to internal components.
TO REMOVE BATTERY PACK
See Figure 2.
[] Lock the switch trigger by placing the rotation selector
in the center position.
[] Depress the latches on the side of battery pack.
[] Remove the battery pack from the tool.
_1_ WARNtNG: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
DEPRESSLATCHESTO
RELEASEBATTERYPACK
TOiNSTALL
TOREMOVE
BATTERYPACK
LATCHES
Fig. 2
10