Manual

_ WARNING:Whenservicing,useonlyidentical
Craftsmanreplacementparts.Useof anyother
partmaycreateahazardorcauseproduct
damage.
GENERAL
Onlythepartsshownonthepartslist,areintendedto
berepairedorreplacedbythecustomer.Allother
partsrepresentanimportantpartof thedouble
insulationsystemandshouldbeservicedonlybya
qualifiedSearsservicetechnician.
Avoidusingsolventswhencleaningplasticparts.
Mostplasticsaresusceptibleto damagefromvarious
typesof commercialsolventsandmaybedamaged
bytheiruse.Usecleanclothsto removedirt,carbon
dust,etc.
_k WARNING:Donotatanytimeletbrakefluids,
gasoline,petroleum-basedproducts,penetrating
oils,etc.comeincontactwithplasticparts.They
containchemicalsthatcandamage,weakenor
destroyplastic.
Ithasbeenfoundthatelectrictoolsaresubjectto
acceleratedwearandpossibleprematurefailurewhen
theyareusedonfiberglassboats,sportscars,
wallboard,spacklingcompounds,orplaster.The
chipsandgrindingsfromthesematerialsarehighly
abrasiveto electrictoolpartssuchasbearings,
brushes,commutators,etc.Consequently,it isnot
recommendedthatthistoolbeusedfor extended
workonanyfiberglassmaterial,wallboard,spackling
compounds,orplaster.Duringanyuseonthese
materialsit isextremelyimportantthatthetoolis
cleanedfrequentlybyblowingwithanairjet.
CUTTERS
Getfastermoreaccuratecuttingresultsbykeeping
cutterscleanandsharp.Removeallaccumulated
pitchandgumfromcuttersaftereachuse.
Whensharpeningcutters,sharpenonlytheinsideof
thecuttingedge.Nevergrindtheoutsidediameter.Be
surewhensharpeningtheendofa cuttertogrindthe
clearanceanglethesameasoriginallyground.
COLLET
Fromtimeto time,it alsobecomesnecessarytoclean
yourcolletandcolletnut.Todoso,simplyremove
colletnutfromcolletandcleanthedustandchipsthat
havecollected.Thenreturncolletnutto itsoriginal
position.
LUBRICATION
Allof thebearingsinthistoolarelubricatedwitha
sufficientamountofhighgradelubricantforthelifeof
theunitundernormaloperatingconditions.Therefore,
nofurtherlubricationis required.
EXTENSION CORDS
The use of any extension cord will cause some loss of
power. To keep the loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw.
A wire gage size (A.W.G.) of at least 14 is
recommended for an extension cord 100 feet or less
in length. When working outdoors, use an extension
cord that is suitable for outdoor use. The cord's jacket
will be marked WA.
a,
CAUTION: Keep extension cords away from the
cutting area and position the cord so that it will
not get caught on lumber, tools, etc., during
cutting operation.
a,
WARNING: Check extension cords before each
use. If damaged replace immediately. Never use
tool with a damaged cord since touching the
damaged area could cause electrical shock
resulting in serious injury.
Extension cords suitable for use with your router are
available at your nearest Sears Retail Store.
,_ WARNING: Always wear safety goggles or
safety glasses with side shields during power
tool operation or when blowing dust. If operation
is dusty, also wear a dust mask.
18