Manual

KNOW YOUR COMPOUND MITER SAW
See Figure1,
Beforeattemptingto use thisproduct,familiarizeyourself
wffhart operatingfeatures and safety rules.
15 AMP MOTOR
Yoursew has e powerful15 amp belt-drivenmotor with
sufficientpowerto handletough cuttingjobs. It is made
with art ball bearings, and has externallyaccessiblebrush-
es forease of servicing.
12 in. BLADE
A 12 In. carblde-t/ppedsew blade Is Inc./udedwith your
compoundmiter saw.It willout materials up to 4 in, thick
or 7-7/8 in,wide, dependingupon the angle at which the
cutis beingmade.
CARRYING HANDLE
See Figure2.
Forconvenience when carryingor tr_nspodingyour
miter saw from one placeto another,a carryinghandie
has been providedontop of the saw arm.To transport,
turn offand unplugyoursaw,then lower the saw arm and
lock it inthe down position,Lock sew arm by pushingthe
lock pin to the left.
SAW
ARM
CARRYING
HANDLE
LOCKP1N
BEVEL
KNOB
SPINDLE LOCK BUTTON
See Figure3.
A spindlelock buttonhas been provided for lockingthe
spindlewhich keeps the blade in your saw from rota_ng.
Depressand holdthe lock buttonwhile installing,chang-
ing, or removingblade.
SWITCH
TRIOOER
SPINDLE
LOCKBUT[ON
Fig.3
SWITCH TRIGGER LOCK
See Figure,1.
To preventunauthorizeduseofyourcompoundmiter saw,
we suggest thatyou disconnectit from the power supply
and lock the switchIn the off position.Tolock the switch,
installa padlock (notincluded)throughthe holeinthe
switchtrigger.Alockwith a longshackleup to 9/32 in.
diametermay be used,When the lock Is installedand
locked, the switchis inoperable.Storethe padlockkey in
anotherlocation.
MITERLOCK
HANDLE
SAWARM
LOCKEDINDOWNPOSITION
Fig. 2
MITER LOCK HANDLE
See Figure2.
The miterlock handlesecurely locksyour saw at desired
miterangles.
SWITCH
TRIGGER
Fig.4
11