Manual

LASERTRACTM LASER GUIDE
For more accurate cuts, a LaserTrecTM laser guide is
includedwith yourmitersaw.When used properly,the
laserguide makes accurate, precisioncuttingsimpleand
easy.
POSITWE STOPS ON MITER TABLE
Positivestops have been providedat 0°, 15", 22-1/2°,
31.62°, and 45° on boththe left and right sideofthe miter
table.
BEVEL LOCK KNOB
The bevel lock knob securely locksyourcompoundmiter
sew at desired bevel angles.A positivestop adlustment
screwhas been providedon each aide of the saw arm.
These adjustmentscrewsaro for making fine adjustments
at O"and 45",
ELECTRIC BRAKE
An electricbrake has been prov/dedto quicklystop blade
rotationafter the switchis released.
CROWN MOLDING STOP
The crownmolding stop makes positioningcrown molding
verticallyagainstthe fence easier.
SLIDING MITER FENCE
Hold the workplace securelyagainst the miter fence when
making all cuts. The s_k_ingfeatureallows bothfences0eft
and right)to be moved when making bevel or compour_d
cuts,
Slidethe mltar fences by looseningthe fence screws.
Oncethe desiredpositionofthe miterfence isdeter-
mined, retightenthe fence screwsto securethe sliding
lense.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guardIs madeof shock-resistant,see-
throughplasticthat providesprotectionfromeach side
of the blade. It retractsover the upper blade guard as the
saw IsloweredInto thework.piece.
ROLLER SUPPORT
With the rollersupport installed,the workplacewill glide
smoothlyand levellyover the table extensions.
The followingtools/,not Included} are needed for checkingadiustlnentsof yoursaw or for installing the blade:
COMBINATIONWRENCH(2)
10turn,14mm
COMBINATIONSQUARE
FRAMINGSQUARE
PHILLIPSSCREWDRIVER FLg.5
12