Manual

Asmentionedpreviously,the saw hasbeen factory
assembledand adjusted.
MITER LOCK HANDLE
See Figure8,
Cut the tie-wraps holding the saw armand the miter rock
In place.To Instal[ the miter lookhandle, placethe thread~
ed stud into the threadedholein the controlerm. Turn
clockwiseto tighten.
EXHAUST
PORT
TO
TIGHTEN
TO
LOOSEN
CONTROL
ARM
MITER
TABLE
Fig. S
DUST GUIDE
See Figure9,
To Installthe dust guide, ptace the end overthe exhaust
portin the upper bladeguard. rum theguide sothat the
open end isfacingdown ortoward therearof the saw.
Fig. 9
DUST BAG
See Figure 10.
Aduet bag isprovidedfor useonth_smitersaw. Itfits
o'_e_"_h_dustguideor the upper b_adeguam. To Ir,stat_,
squeezethe two metalclipsto open the mouthofthe bag
and slide it on to the dust guide. Releasethe _ips. The
metal ringin the bag shouldlock in between the grooves
on thedust guide.
To removethedust bag for emptying,simply reversethe
above procsqure.
DUSTBAG
Fig. 10
15