Manual

_lb WARNING: When usingthework clampwith the
stop block, installthe clamp on the same side as the
stop block. Thiswill ellmlnatethe posslb(tityof tmp-
p]ngtheworkplece, resulting Inthe saw blade and
workpiece kickingup. Failureto heed this warning
can resultin sedous personalInjury,
STOP BLOCK
See Figure 14.
The stop blockisusefulas a stop for making repetitive
cutsto the same length.Itcan be instaltedon eitherside
of the saw base:
• Slidethe stop block onthe table extension.
• Adjustthe stop block the desired distance from the
bladefor the cutto be made.
• TightensmallwLngscrewto securethe stop blockto
the table extension.
• Make a test cut inscrap material and measure the
lengthof the workpiece.
• Make any necessaryadjusb_enta.
WORK CLAMP ASSEMBLY
See F/gum 15,
The work clamp providesgreater controlby clampingthe
workp_eceto the fence or the saw table. It alsoprevents
theworkplecefrom creepingtowardthe saw blade, This Is
veryhelpfulwhen cuttingcompound miters.
Dependingon the cuttingoperationand the size of the
workpiece, it may be necessaryto use a C-clamp rnstead
of thework clamp to secure the workpiece priorto ma_ng
the cut.
A WARNING: In s_me operations,thework clamp
assemblymay interferewith the operationofthe
bladeguardassembly.Always make surethere Is no
interferencewith the blade guard pdor to beginning
any cutt(ncJoperat(on to reduce the dsk of sedous
personalinlury.
To Installthework clamp:
• Placethe shell of the work clamp In eitherhole onthe
saw table base.
• Rotate the knobon the work clamp to move it in or out
as needed or pressthe quick releaselevertot faster
positioning.
TO INSTALL BLADE
See Figures 16 - 18,
_l WARNING: A 12 k_.'blade Lsthe rru_xkTtumblade
capacity ofthe saw.Neverusea bladethatIstoo thick
to allowouter blade washer to engagewith the fiats
onthespindle,Largerbladeswillcome Incontactwith
the b|ade guards,whilethickerbiades w'Lllpreventthe
blade screw from securingthe blade on the spindle,
Either of these situations could result in a serious
_sok_,entend can cause serlouspersonaliniury,
17
STOP
BLOCK
TABLE
EXTENSION
MITER
SAWBASE
WORK
CLAMP
Fig. 14
F_9.15