Manual

• Unplugthe saw.
• Loosenphillipsscrewon the blade bolt cover until
blade boll cover can be raised.
• Gently raisethe lower blade guard bracket,releasing
lowerblade guard from notchsothat lower blade
g_xardand blade bolt cover can be rotated up and back
to expose the bladebolt.
• Depressthe spindlelock button and rotatethe blade
bolt until Me spindle locks.
• Using the blade wrench provided, loosen and remove
the bladebert.
NOTE: The blade bolthas left hand threads.Turnblade
boltclockwiseto loosen.
• Removethe laserguide or outer blade washer. Do not
removeinnerbtade washer.
• Wipe a drop of oUonto innerblade washer and outer
blade washer wherethey contact the blade.
A
WARNING: If Inner b(ade washer has been
removed, replaceit before placingblade on
spindle.Failureto do so could cause an accident
slnca brede will not tightenproperty.
II Fitsew blade Inside lower blade guardand onto
spindle.The blade teeth point downward at the front
ofsaw as shown in_guTs16.
A CAUTION: Alwaysinstall the bladewith the blade
teeth and the arrowpdntedon the sideof the blade
pointingdown at the front of the saw. The direetion
ofblade rotationis also stamped with an arrowon
the upperblade guard,
• Replace the laser guide or outer blade washer (sea
instructionson the following page). The double"D"
f_atsalignwiththe flats on the spindle.
• Depressspindlelock button and replacebladebolt.
NOTE: The bladebolt hasleft handthreads.Turnblade
boltcountemlockwiseto tighten.
• Tightenblade boltsecurely,
• Replacethe lower blade guard and blade bolt cover.
• Retightenthe phillipsscrew secudngthe blade bolt
COV8_
LOWERBLARE
GUARDBRACKET
TO
LOOSEN
TO
TIGHTEN
BLADE
BOLT
OU'IETIBLADEWASHER
WITHDOUBLE"D"FLATS
PHILLIPS
Fig, 16
LOWER
GUARD
_NRERBLADE
WASHERWITH
DOU6LE"D"FLATS
Fig. 17
,,_& CAUT|ON: Make surethe spindlelock button ia not
engaged before reconnectingsaw to power source.
Neverengagespindlelock button when bladeis
rotating.
IPINDLE
LOCK
OLIn'ON
Fig. 18
18