Manual

MARIOHGSOH
THROATPLATE
CUTTING WARPED MATERIAL
See Figures43 - 44.
When cuttingwarped material,always make sureIt Is
positionedon the mitertable with the convexside
againstthe fence as shown in f_gure43.
If thewarped matedal Is positionedthewrong way as
shownin f_gum44, itwillpinch the bladenear the comple-
tionof thecut.
RIGHT
Fig. 43
WRONG
Fig.44
,_ WARN,|NG: To avoid a k_c_d_ack_d to avoid
seriouspersonaliniury,never positionthe concave
edge of bowed or warped material agaLnstthe fence.
CLAMPING WIDE WORKPIECES
see Figure45.
When cuttingwLcleworkpieces suchas a 2 in. x 8 in.,
boardsshouldbe clamped with a C-clamp as shown in
figure 45.
WIDE
BOARD
Fig. 45
31