Manual

_ WARNING: When servicing, use only identical
replacement parts. Use of any other parts may create
a hazard or cause product damage.
_ WARNING: Always wear safety goggles or safety
glasses with side shields during power tool operation
or when blowing dust. If operation is gusty, also wear
a dust mask,
GENERAL
Avoid using solvents when cleaning plastic parts. Most
olaslics are susceptible Io damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
_ WARNING: Do not at any time let brake fluids.
gasoline, petroleum-based products, peFetrating
oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken, or destroy plastic
which may result in serious personal injury.
38
L_ Periodically check all clam
bolts for tightness and condition.
plate is in good condition and in position.
Check the blade guard assornbly.
[] To maintain the table sudaces, fence, and rails,
periodically apply paste wax to them and buff to
provide smooth functioning. To prevent work from
slipping during cutting operation, Do not wax the
working face of the miter fence.
B Protect the blade by cleaning out saw dust from
underneath the table and in the blade teeth. Use a
resin solvent on the blade teeth.
I_ Clean ptastic parts only with a soft damp cloth.
not use any aerosol or petroleum solvents.
LUBRICATION
This saw has been lubricated at the factory prior to ship
rnent. Following exlended use, you should illspec/and
lubricale the following areas to assure smooth operatic!