Manual

I PROBLEM CAUSE SOLUTION
Sawdoesnotmakeaccurate PositivestopsinsidecabinetneedAdjustpositivestops.
gO'or45'cuts. adjusting(BevelCuts).
Mitergaugeismisaligned(Miter Adjustthemitergauge•
Cuts).
Heighbtbeveladjustinghand- Gearsorscrewpostinside Cleanthegearsorscrewpost.
wheelishardtoturn. cabinetarecloggedwithsaw
dust
SawdoesnotslarL Pluginmotorcordorwallcord.
Blade makes poor cuts
Blade does not lower when
turning height/bevel adjusting
bmTdwheeL
Motor labors in rip cut.
Molor cord or wall cord is not
pklgged in.
Circuit iuse is blown•
Circuit breaker is tripped.
Cord or switch is damaged.
Blade is dutl or didy.
Blade is wrong type for eul being
made.
Blade is mounted backwards.
Locking lever is not at full left
position.
Replace circui[ fuse.
Reset circuit breaker:
Have the cord or switch replaced at your
Sears Sewice CenledDepadment.
J
Clean, sharpen, or replace blade.
Replace with correct type.
Remount blade.
Move locking lever to left.
Blade not proper for rip cut. Change blade; rip blade typically has few_
teeth.
4O
• • • • . . :
• . • .