Manual

FULL ONE YEAR WARRANTY ON CRAFTSMAN RADIAL ARM MITER SAW"
If within one year from the date of purchase, this Craftsman Radial Arm Miter Saw falls due to a
defect In matedal or workmanship, Sears will repair It, free of charge,
WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS STORE OR
SERVICE CENTER THROUGHOUT THE UNITED STATES,
This warranty gives you specific legal dghts, end you may also have other rights which vary from
state to state.
SEARS ROEBUCK AND CO.
698/731A
SEARS TOWER
CHICAGO, IL 60684
i! l !! !
INTRODUCTION
DOUBLE INSULATION Is a concept in safety, In elec-
tric power tools, which eliminates the need for the
usual three wlregrounded power cord and grounded
supply system, Wherever there is electric current in
the tool there are two complete sets of insulation to
protect the user. All exposed metal parts are Isolated
from the Internal metal motor components with pro-
tatting insulation.
IMPORTANT -- Servicing of a tool with double in-
sulation requires extreme care and knowledge of the
system and should be performed only by a qualified
service technician, For service we suggest you
return the tool to your nearest Sears Store for repair.
Always use original factory replacement parts when
servicing.
RULES FOR SAFE OPERATION
WARNING -- DO NOT ATTEMPT TO OPERATE UNTIL YOU HAVE READ THOROUGHLY AND UNDERSTAND
COMPLETELY ALL INSTRUCTIONS, RULES, ETC. CONTAINED IN THIS MANUAL. FAILURE TO COMPLY CAN
RESULT IN ACCIDENTS INVOLVING FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL INJURY. SAVE
OWNERS MANUAL AND REVIEW FREQUENTLY FOR CONTINUING SAFE OPERATION, AND INSTRUCTING
POSSIBLE THIRD.PARTY USER.
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL -- Read owner's manual carefully. Learn its ap-
plications and limitations as well as the specific potential hazards peculiar to
this tool.
2. GUARD AGAINST ELECTRICAL SHOCK BY PREVENTING BODY CONTACT
WITH GROUNDED SURFACES. For example: Pipes, radiators, ranges, refrig-
erator enclosures.
.
4.
KEEP GUARDS IN PLACE and in working order.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see
that keys and adjusting wrenches are removed from tool before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
J
.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tool in damp
or wet locations or expose to rain. Keep work area well lit. Never use in explo-
sive atmosphere. Normal sparking of motor could ignite fumes.
KEEP CHILDREN AWAY. All visitors should be kept safe distance from work
area.
8. MAKE WORKSHOP KID.PROOF with padlocks, master switches, or by re-
moving starter keys.