OPERATOR'S MANUAL 3/8 in. PROFESSIONAL REAR HANDLE VARIABLE SPEED/REVERSIBLE DOUBLE INSULATED DRILL Model No. 315.281260 _11_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Craftsman Consumer Helpline: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.sears.
• Warranty .......................................................................................................................................................................... 2 • introduction 2 • General Safety Rules .................................................................................................................................................... • Specific Safety Rules ..........................................................................................................
_IL WARNING. _Readall instructions.Failuretofollow allinstructions listedbelowmayresultin electric shock,fireand/orseriousinjury.Theterm"power tool" inallofthewarningslistedbelowrefersto yourmains-operated (corded)powertoolor batteryoperated(cordless) powertool. SAVETHESEINSTRUCTIONS WORKAREA SAFETY [] Keepwork area clean and well lit. Cluttered or dark areas invite accidents. [] Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
SERVICE [] Whenservicinga powertool, useonly identica! replacement [] Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained, _ parts. Follow instructions in the Maintenance section of this manual Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. WARNING. I To reduce the risk of injury, user must read instruction manual.
Someofthefollowingsymbolsmaybeusedonthis product.Pleasestudythemandlearntheirmeaning.Proper interpretation ofthesesymbolswillallowyoutooperatethe productbetterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic no No Load Speed Rotational speed, at no load [] Class II Tool Double-insulated ...
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsofriskassociatedwiththisproduct. SYMBOL _IL SIGNAL MEANING DANGER: Indicates imminently in death oranserious injury.hazardous situation, which, if not avoided, will result WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
DOUBLE iNSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. _I_ WARNING: The double insulated system is intended to protect the user from shock resulting from a break in the toots internal insulation.
PRODUCT SPECIFICATIONS Chuck ......................................................... No Load Speed ................................... 3/8 in., Keyless 0-2,500/min Switch ......................................................... Input ................................ 120 V, 60 Hz, AC only, 6.5 Amps Power Cord ................................................................ 10 ft. (RPM) Variable Speed Net Weight ............................................................... 4.3 Ibs.
KNOW YOUR DRILL KEYLESS See Figure !. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. CHUCK The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.
DIRECTION _tb WARNING:Donotallowfamiliaritywithproducts to makeyoucareless. Remember thata careless fractionof a secondis sufficientto inflictserious injury. OF ROTATION SELECTOR (FORWARD/REVERSE) See Figure 2. The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for forward drilling.
BELTCLIP '_ WARNING, Do not hold the chuck body with one hand and use the power of the drill to tighten the chuck jaws on the drUI bit. The chuck body could slip in your hand, or your hand could slip and come in contact with the rotating drill bit. This could cause an accident resulting in serious personal injury. _, WARNING: Always unplug the tool when installing or removing bits, adjusting settings, or when the tool is not in use.
LOCK-ON BUTTON DRILLING See Figure 6. See Figures 7- 8. This drill is equipped with a lock-on feature, which is convenient for continuous drilling for extended periods of time. To lock-on: A level is located on top of the motor housing to help keep the drill bit level during use. [] Push in and hold the lock-on button, located on the side of the handle. [] Depress and release the switch trigger to be sure the drill is in the OFF position before connecting it to a power supply.
,_llb WARNING" LEVEL Be prepared for binding at bit break- through. When these situations occur, the drill has a tendency to grab and kick in the opposite direction and could cause loss of control when breaking through material. If not prepared, this loss of control can result in possible serious injury. [] When ddlling hard, smooth surfaces, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off-center as the hole is started.
,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. _, WARNING: MALLET Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts.
[] Insertthehexkeyintothe chuckandtightenthe chuck jawssecurely. Tapsharplywitha malletina counterclockwisedirection.Thiswillloosenthechuckonthe spindle.It cannowbeunscrewed byhand. TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing. To tighten: [] Unplug the drill. MALLET [] Open the chuck jaws. [] Insert a hex key into the chuck and tighten chuck jaws securely.
CRAFTSMAN 3/8 in. DRILL - MODEL 315.281260 NUMBER The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your DRILL or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING I INSTRUCTIONS SEENOTE 1 4 PARTS LIST Key No. Part Number 1 6611903 Description Chuck Screw ................................................................................................... Qty. 1 2 690033083 Chuck ................
