Instruction Manual

Flanges toward

bottom

Top

bottom

Notch

in front

Top Bottom

From step (4)

Lower middle

mounting position

EE(6)

DD(6)

AA(6)

STEP (5):

Note: shelf (D) from step (4) must be installed in bottom middle

location to allow door to latch and lock. Top and bottom shelves

should have slots facing toward back of unit. Install top shelf first.

• Insert shelf (D) from bottom of unit.

• Place in desired mounting location in back of unit, and rotate

into place as shown.

• Attach using (2) (AA), (2) (DD), and (2) (EE) in square

mounting holes as shown.

• Repeat until all (3) shelves are in place.

• Finger tighten.

Note: Shelves may be organized in several different

configurations. Below is the recommended initial shelf spacing.

Top and bottom shelf spacing may be adjusted as necessary.

Use

with AA

In square

holes

BB(8)

EE(12)

DD(4)

AA(4)

STEP (6):

• Insert bottom (G) into lower end of assembly and attach using

(4) (AA), (8) (BB), (4) (DD), and (12) (EE).

• Finger tighten.