Instruction Manual
7
Square unit
FF(4)
STEP (7):
• Install (4) leveling feet (GG). Some adjustments may be
necessary after cabinet is in desired location.
• Place the cabinet in its upright position.
• Square the cabinet and wrench tighten all bolts. (Do not tighten
screws holding striker (FF) in place on middle shelf.)
CC(16)
F
CC
Adjust for
door latch
Middle shelf
Tighten screws
STEP (8):
• Ensure lock on right side door (F) is in the unlock position.
• Attach right side door (F) as shown, using (8) (CC).
• Adjust door for optimum performance before tightening screws.
(Door latch should line up with slot on middle shelf.)
• Attach left side door (E) in the same manner.
• Adjust striker (FF) for optimum performance.
• Tighten screws to hold in place.