Operator`s manual

ManualsBrandsCraftsman ManualsComputer equipment320.17543

DUST

EXTRACTION HOODS (Figs,, 26 and 26a)

There are dust extraction hoods Includedwilh eachfouler base Eachhood issized toaccept a

IVz-in vachoseadapler,sold separatel_

Dust Extraction Hood for Ptung Base (Fig, 26)

To altach the hood onto the plunge base,

position and secure it Io the back of the base

with 1he lwo screws (included) as shown

{n Fig 26

The dust extraction hood can also be tnslailed

with the hose outlet facing to the trent of the

plunge bass by simply removing lhe chip shield

and atlachlng the hood at the Iront ot the bass

Dust Extraction Hood for Fixed Base (Fig, 26a)

To attachlhe head onlo theli×ed base,

pastlien and secureit fo the back el _hebase

withthe twoscrews {included) asshown

in Fig 26a

Fig. 2Be 2 screwsincleded

per_sonZ_WARNING: ALWAYS turn motor off and unplug router from power source }

before making any ad ustments or tnslalllng accessories. Failure to turn motor oft|

and unplug router could result In accidental starting which can cause serious |

I Injury. J

by a quaUfled service technician at e Sears Service Center,

GENERAL

Only the parts shown on the parts I_slare Intended for repair or replacement by the

customer, A{Iother parts represent an Importontport of the double insulationsystem

and should be serv{ced onty be a qualtfled Sears service technician

"i ................................................................................................................................................................

17543