Operator`s manual

I Z_ WARNING: BE SURE to read end understand sn Instructions in this ]
i
manual before using these reuters. Failure to follow all Instructions may result
]
electric shock, fire and/or serious personal injury°
WORK AREA SAFETY
1 Keepyourworkarescleanandweltllt°Clutleredworkbenchesanddarkaress
invite accidents,
2 DO NOT operate power tools In explosive atmospheres, such as In the presence
of flammable liquids, gases, or dust,. Power toots create sparks which may ignite
the dual or fumes
3 Keep bystanders, chgdren and visitors away while operating a power tool
Dis{factions can cause you to lose control
4 Make your workshop chtldproof with padtocks and masler switches Lock toois
away when not in use
5 MAKE SURE the work area has ample lighting so you can see |he work and that
there are no obstructions that wtl! interfere with safe operation BEFORE using
your muter
PERSONAL SAFETY
1 KNOW your power tool, Read thisoperator's manual carefully Learn the router's
apptcatlons and limitations, as well as the specific potenlia]hazards related to this
tool
2 STAY ALERT, watch whatyou are doing and use commonsense when operating
a power tool
3 DO NOT use toolwhite tired or underthe Inlluenco of drugs, alcohol or med]catlen
A moment of Inattention whileoperating power 1oo1_may resutt Inserious personal
injury
4 DRESS properly, DO NOT wear looseclothingof"Jewelry Pull back tonghair Keep
your hair,clothing,and gloves away from moving parts Loose c!olhlng, or long hair
can be caughtIn moving pads Air vents oftencover moving parts and shoutd also
be avoided
5 AVOID accidental stading Be sure swilch is in"OFF" positionbefore plugging In
DO NOT carry tools with your finger on the switch, Carrying tools with your finger
on the switch or ptugglng tn loels that havethe switch in the "ON" position Invites
accidents
6 REMOVE ad}us|lng key'sor blade wrenches before turningIhe tool "ON" A wrench
thai Is left attached to a rotatingpart of the tool may result inpersonalinjury
7 Do not overreach. Keep proper footing and balance at ell times. Properfooting
and balance enables belier controi of the tool inunexpected situations,
8 ALWAYSSEGUREYOUR WORK. Use clampsor a vise lo hold workplacesecurely
ItIs safer than using your hand and frees both hands tooperate tool
g USE SAFETY EQUIPMENT, Always wear eye protsction Duetmask, non-skid safety
shoes, hard hal, or hearing protectionmust be usedfor appropriateconditions
I0 DO NOT USE ON A LADDER or unstabte supportoStable ]ootlngon a solld surface
enablesbetterconlruloflhetoolInunexpectedsituations
4