Operator`s manual

z_ WARNING: Use of this toot can generate dust containing chemicals
known to cause cancer, birth defects or other reproductive harm..
Some examples of these chemicals are:
• Lead from lead-based paints
,, Crystalline silica from bricks and cement and other masonry produels
• Arsenic and chromium, tram chemically treated lumber
Your risk from these exposures varies, depending upon how often you
do this type of work.To reduce your exposure to these chemicals:
• Work to a weIFventliaiedarea
• Work withapproved safety equlpmenf,such as thosedust masks
thatare specially designed to lister out microscopic padlc_es
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drlltlng end other construction acfivttles,,Wear protective clothing and wash
exposed areas with soap and water. Allowing dust to get Into your mouth,
eyes, or lay on the skin may promote absorption of harmful chemicals,,
I
Z_ WAR NING: Use of this tool can generate and/or disburse dust, which I
may cause serious end permanent respiratory or other Injury. Always usa I
N[OSHIOSHA approved respiratory protection appropriate for the dust exposure,
Direct particles away from face and body_
ADDITIONAL RULES FOR SAFE OPERATION
' Z_ WARNING: BE SURE to read end understand eli instructions. Failure to
follow all Instructions listed below may result In electric shock, fire endtor
serious personal Injury.
1 Know your power tool. Read this operator's manual carefully. Learn the applications
and Itmitat_ons,as we_las the speettie potenLlalhazards related to thistoo_ Following
this ru_ewiltreduce the riskof elecldc shock,fire or serious Inlury
2 ALWAYS wear safety glasses or eye shields when using this routel_,Everyday
eyeglasseshave only impact-resistant lenses; they are NOT safety glasses
3 PROTECTyourlungs, Wearafacemaskerdustmesktftheoperattonisdusty
4 PROTECTyourhearlng. Wearappropriatepereona_hearingprotectlendurlnguse
Under some conditions noise from thisproduct may contrlbute to hearingloss
5 ALLVISTORS AND BYSTANDERS MUST wear the same safety equipmentthat the
operator eltherouter wears
6 INSPECT the tool cords padodlcs!ly and If damaged have them repaired at your
nearest Sears Service Center. BE AWARE of the cord location,
17543