Operator`s manual

ID]_]_II]_IIIEe]_]
KNOW YOUR IMPACT WRENCH (Fig.l)
The machine is intended for driving and loosening screws and bolts as well as
for tightening and loosening nuts within the range of the Product Specifications.
Fig. 1
1/2-in. Square Externally
Drive Accessible
Carbon Brushes
Forward/
Reverse Switch
Live Tool Indicator
LED Work Light
_i, WARNING: Do not allow familiarity with the impact wrench to cause a lack of
alertness. A fraction of a second of carelessness is enough to cause severe injury.
PRODUCT SPECIFICATIONS
Motor 120Volt 60Hz AC only
No Load Speed 2100 RPM
Impacts Per Minute 2700 BPM
Torque 350 ft-lbs
Capacity Standard bolt M 18 - M22 (11/16" - 7/8")
Capacity High tensile bolt M16 - M20 (5/8" - 13/16")
Wrench Weight 7.71 Ibs (3.5kg)
27990 Manual_Revised_lO 1202 Page 10