Operator`s manual

Before attempting to use this jig saw, familiarize yourself with all of its operating
features and safety requirements.
This Jig Saw has the following features:
• 2-in-1 design: use it with the top handle or remove the handle and use it as a
barrel-grip saw.
6 Amp, 800 to 3000 SPM (strokes per minute) variable speed motor.
LaserTracTM: laser generator displays a bright red line along the cutting line.
Variable Speed is controlled by the speed dial located on the back of the
trigger switch handle.
Scrolling/Orbital Action: The control lever regulates the 5 cutting modes of
the saw.
1. SCROLMNG 360 ° blade rotation using scrolling knob, normal up and
down blade motion. No orbital action.
2. Smooth minimal splintering, normal up and down blade motion.
No orbital action.
3. Low for cutting most metals, low orbital action.
4. Medium for cutting plastics, hardboard, medium orbital action.
5. Fast for maximum orbital action, used for fast cutting in plywood, softwoods.
Blade guide support rollers provide added blade control.
15/16-inch blade stroke for faster cutting.
Durable base glides smoothly over the workpiece.
• Bevel scale for easy adjustment.
Bevel cutting capacity 0 ° to 45 ° left and right.
Quick blade change without tools.
LED worklight illuminates cutting area.
"Live tool indicator" LED light is green when the saw is plugged into a power
source.
Ergonomically designed 2-in-1 soft-grip handles for maximum control and
balance. Guide the with top mount handle, or use the barrel grip for low
center of gravity precision.
2-way saw dust removal: 1. Blower position blows debris away from cutting
line. 2. Vacuum position for attachment to a wet/dry vac (sold separately).
On board blade storage at base.
Durable cast aluminum and high-impact resistant housing and handle protect
tool from damage.
Include carry bag for easy carrying and storage.
28223 ManuaLRevised_lO 0310 Page 13