Manual

/'1",CAUTION! The blade guidesupportsthe blade when cutting and must at all times I
restagainstthe back edge ofthe blade exceptwhen inthe scrollingmode. It shouldrotate
I
free y.
TURN POWER "ON-OFF" WHEN USING
AS A BARREL GRIP SABRE SAW (Fig. 3)
1.Connect the powercord ofyour saw to a
standard householdpower outlet.
2,Turn yoursaw 'ON' byslidingthe "ON-OFF"
switchforward untilit'clicks' into the start
position (Fig. 3).
3.To turn power "OFF", press in on the rear
section of the "ON-OFF" switchto stop
the tool.
Fig. 4 Fig. S
Metal
top
ATTACHING TOP HANDLE ONTO SABRE SAW (Figs. 4, 5)
Remove the "tophandle attaching plate"from the rear top ofthe barrel(Fig. 4)
byslidingthe "plate" completelyoff the saw's motorhousingin the directionof the arrow.
Guide the metal attachingplate located in the insidefront of the "top" handle toward the slot
located in the front of the sabre saw just beneath the scrolling knob (Fig. 5). At the
same time, align and slide the rear bottom of the "top" handle into the attaching compartment
which had been covered by the attaching plate (Fig. 4) that you removed earlier. When
sliding the "top" handle onto the attaching plate compartment, hold down the handle-release
buttons until "top" handle snaps and locks into place (Fig. 5),
11