Manual

Z_WARNING! Failureto unplug the saw

from the power source whenassembling parts, I

makingadjustmentsor changingblades could

resultin accidental starting causingpossible

seriousinjury.

TOOL-LESS BLADE

INSTALLATION (Fig. 6, 0)

The tool-lessblade changecontrolallows

youto removeand replacethesaw blade

quickly and easilywithoutthe use ofadditional

tools.

1. Place your fingeron the lower edge of the

see-throughblade guard and pull forward

until it locks in place (Fig. 8).

2. Slide the tool-less blade-change cover up,

then insert the blade into the slot of tool-less

blade change holder (Fig. g).

3. Release the tool-less blade-change cover to

lock the blade in place.

4. Pull down on the blade to be sure the blade is

securelylocked in place. Blade teeth should

be pointing forward and down.

NOTE: For use with both 'T' & 'U' shanked blades.

I FIg. 8

Fig. 9

REMOVING THE BLADE (Fig. 8, 9)

1.Unplug the sabre saw.

z_WARNING: Failureto unplugthe saw could result inaccidental starting

causing possibleserious personal injury.

2. Followsteps 1 through3 ontool-lessblade installation(above).

3. Carefullyremovethe blade.

•/_ WARNING: ALWAYS CLAMP WORKPIECE. Failuretoclamp workpiececouldresult

in workpiecebeingthrownor kickedbackcausingseriouspersonalinjury.