Manual

L_WARNING: BE SURE to read and understand all instructionsin this manual
before using the sabre saw. Failure to followall instructions may result in hazardous
red at on exposure, electric shock, fire and/or serious personal injury.
SAFETY PRECAUTIONS FOR LASER
This CRAFTSMAN PROFESSIONAL Sabre Saw has a built-inlaser light. The lasar is a
Class Ilia and emits output power of a maximum 2.5roW and 650nm wavelengths. These
lasers do not normally present an optical hazard. However, DO NOT stare at the beam
because it can cause flash blindness.
on.our, ,
where the laser light isemitted bythe saw. ALWAYS BE _ ==,
AWARE of its locationwhen using the sabre saw. ALWAYS
MAKE SURE that any bystanders in the vicinity of use are
made aware of the dangers of looking directly into the laser.
Iz,
iZ]__WARNING! LASER LIGHT. LASER RADIATION. Avoid Direct Eye Exposure.
! DO NOT stare into beam. Only turn laser beam on when the sabre saw ison the
work piece. Class Ilia laser.
L_WARNING: Use of controls, adjustments or performance of procedures other
than those specified in this manual may resultin hazardous radiation exposure.
/_WARNING: The use of opticalinstrumentswiththisproductwillincreaseeye hazard.
1.The tinted glasses that were included willenhance the laser light in bright light
conditions,DO NOT wear these glassesiftheyinterferewiththe safe operationof this saw.
2. NEVER aim the beam at any person or object other than the workpieos.
3. The laser beam can be harmful tothe eyes. ALWAYS avoid direct eye exposure.
DO NOT look directly into the laser beam outputaperture during operation,
4, The laser on the sabre saw is not a toy.ALWAYS keep out of the reach of children. The
laser light emitted from this device SHOULD NEVER be directed towards any person
for any reason.
5. ALWAYS be sure the laser beam is aimed at a sturdy workpiece (such as wood or
roughcoated surfaces) that does not have a reflective surface,
6. DO NOT use on surfaces such as sheet steel that have a shiny, reflective surface.The
shiny surface could reflect the beam back at the operator.
7. ALWAYS be aware that laser light reflected off of a mirroror any other reflective
surfaces can also be dangerous.
/_CAUTION: ALWAYS follow onlythe instructions contained in this manual when I
usingthis laser.Use of thisfeature in any manner otherthan what appears inthis manual
I
may result in a hazardous radiation exposure.
3