Manual

SAFETY RULES FOR SABRE SAWS cent.
5.ALWAYShold tool by insulated gripping surfaceswhen performing an eperation
wherethecuttingtool maycontacthiddenwiringor itsowncord.Contact witha
'live" wirewiltmakethe exposedmetal partsofthetool "live"and shockthe operator.
6.ALWAYSuseblades that havethecorrectsizeand shape, Bladesthatdo not match
themountinghardware ofthesaw willrunerraticallyandwillcause lossof control.
7.ALWAYSBE SURE thatall adjustingscrewsand the blade holderare fastened
tightlyBEFORE makinga cut.Looseadjusting screwscancausethe toolto slip
and loss ofcontrolmay result.
ADDITIONAL RULES FOR SAFE OPERATION
z_WARNING: BE SURE to read and understandall instructionsinthis manual before
using the sabre saw. Failureto follow all instructionsmay result in hazardousradiation
exposure,e ectrc shock,f re and/orseriouspersonalinjury.
1. Know your power tool. Read operater's manual carefully,Learn the applications and
limitations, as well as the specificpotential hazards related to this tool, Following this
rule will reduce the risk of electric shock, fire or serious injury.
2. ALWAYS wear safety glasses or eye shields when using this saw. Everyday eyeglasses
have only impact-resistant lenses; they are NOT safety glasses. Following this rule will
reduce the risk of serious personal injury.
3. ALWAYS protect your lungs. Wear a face mask or dust mask if the operation is dusty.
Following this rule will reduce the risk of serious personal injury.
4. ALWAYS protect your hearing. Wear hearing protection during extended periods of
operation. Following this rule will reduce the risk of serious personal injury.
5. ALWAYS inspect the tool cords periodically and if damaged have them repaired at your
nearest Sears Service Center or other Authorized Service Facility. ALWAYS be aware
of the cord location. Following this rule will reduce the risk of electric shock or fire.
6. ALWAYS check for damaged parts. Before further use ef the tool, a guard or other part
that is damaged should be carefully checked to determine if it will operate properly and
perform its intended function. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool's operation. A guard or
other part that is damaged should be properly repaired or replaced at a Sears Service
Center. Following this rule will reduce the risk of electric shock, fire or serious injury.
7. DO NOT abuse the cord. NEVER use the cordto carry the tool or pull the plug
from the outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of
electric shock. Following this rule will reduce the risk of electric shocker fire.
7