Operator's Manual MIXTEC HAMMERHEAD™ LITHIUM-ION CORDLESS ARTICULATING AUTO-HAMMER Model No. 320.30261 Oss LISTED WARRANTY SE, + SAFETY [TERRINE] hens enc: + ASSEMBLY + DESCRIPTION A WARNING: To reduce the risk of + OPERATION injury, the user must read and + MAINTENANCE 5 ° understand the operator's manual + LIFESPAN before using this product. Sears Brands Management Corporation Hoffman Estates, IL 60179 US.A.
JL ee = Warranty page 2 Safety Symbols page 3-4 Safety Instructions page 5-8 Unpacking page 9 Description page 10-11 Operation page 12-15 Maintenance page 16-17 Troubleshooting page 17 Exploded View and Part List page 18 Sears Repair Parts Phone Number Back Cover CRAFTSMAN ONE YEAR LIMITED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. With proof of purchase, defective product will be replaced free of charge.
SAFETY ALERT SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers, The safety symbols and the explanations with them deserve your careful attention and understanding.
SAVE THESE INSTRUCTIONS Same of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS GENERAL POWER COL SAFETY WARNINGS A WARNING: Read all safely warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool, READ AND SAVE THESE INSTRUCTIONS + Know your Auto-Hammer. Read the operator's manual carefully.
+ Keep the Auto-Hammer dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, pstroleumbased products or any strong solvent to clean the hammer. + Do not expose the Auto-Hammer to rain or wet conditions. Water entering the tool will increase the risk of electric shock. * Do not overreach, Keep proper footing and balance at all times, This enables better control of the aura-hammer in unexpected situations.
» Use personal protective equipment. Always wear eye protection, Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will reduce personal injuries.
BATTERY TOOL USE AND CARE * Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. * Use power tools only with specifically designated battery packs. Use of any other battery packs may crests a risk of injury and fire.
UNPACKING A WARNING: Always remove the battery from the auto-hammer before assembling parts, making adjustments, installing or removing bits, cleaning, or when it is not in use, This will prevent accidental starting, which could cause serious personal injury. When unpacking the box, do rot discard any packing materials until all of the contents are accounted for: 1. Carefully lift the auto-hammer out of the carton and place it on a stable, flat surface. 2.
DESCRIPTION KNOW YOUR AUTO-HAMMER (Fig. 1} Fig. 1 Magnetic sleeve Hammerhead {Recessed within ~ magnetic sleeve) p / LED work light ~ Trigger switch Hammerhead rotation lock button Fuselages PRODUCT SPECIFICATIONS Motor 12.0 Volt DC Clamp 7/16 inch Hammerhead adjustment angles 0°, 90° Hammer Weight (without battery) 14 Ibs Battery Type Lithium-Lon Battery Voltage 12.
A WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as knowledge of the project you are attempting.
OPERATION LOW BATTERY CAPACITY INDICATOR + If the Fuel Gauge shines red when the trigger switch on the auto-hammer is depressed it means that the battery pack power has run out and the battery pack should be recharged. + Unlike other battery-pack types, Lithium-ion battery packs deliver fade-free power for their entire run time. The tool will not experience a slow, gradual loss of power as you work.
A CAUTION: When placing the battery pack in the tool, be sure that the raised rik on the battery pack aligns with the groove inside the auto-hammer and that the battery snaps into place properly. Improper assembly of the battery pack can cause damage to internal components, TO DETACH BATTERY PACK (Fig. 3) A CAUTION: Avoid the possibility of accidental starting: always take care not to activate the trigger switch when attaching the battery pack. 1.
HAMMERHEAD ARTICULATION (Fig. 1} The hammerhead rotation lock button allows you to set the head at 0°, 48 and 90°. Depress the hammerhead lock button to release the hammerhead. Tilt the head at the appropriate angle for your operation and then release the lock button. HAMMERING NAILS 1. Attach the battery pack to the auto-hammer. 2. Secure the material to be nailed with clamps to keep it from Ming when hammering. 3. Adjust the hammerhead to the appropriate angle for your job.
A CAUTION: Be especially careful when driving shorter nails, such as brads, that you remove your hand as soon as the nal stands on its own in the work piece. B. Resume pushing down on tool and pressing the trigger switch to continue hammering until the nail is fully driven into the work piece. Near the end of hammering, the magnetic sleeve will retract to allow the hammerhead to drive the nail head flush to the work piece.
MAINTENANCE A WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. A WARNING: When servicing, use only identical craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. A WARNING: The use of compressed dry air to clean the auto-hammer is not recommended.
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
PART LIST he Pang 2770153000 5120 Power Pack 1 3 2823066000 Impact Block Assembly 1 4 2823087000 Motor&Gear Assembly 1 5 2823092000 Top Cover Assembly 1 6 2823087000 Gear Set 1 7 3125764000 Switch Trigger 1 8 3125765000 Push Button 1 9 3125768000 Right Gear Case 1 10 3125767000 Left Gear Case 1 11 3125847000 Spindle Bush 1 12 3125848000 Support 1 13 3125849000 LED Cover 1 14 Light Guide Pole 1 15 3125974000 Cover 1 16 3126235000 Rubber Gasket 2 17 3321159000 Left Housing Assembly 1 18 Right Housing Assembly
3704823000 Connecting Pisces 2 32 3704987000 Hoop 1 33 3705048000 Handle Hoop 1 34 3705087000 Connecting Plate 1 35 4360225000 LED 1 368 4860004000 Inner Wire 2 37 4860007000 Inner Wire 2 38 4870064000 Switch 1 38 4880782000 6503 PCB Assembly 1 40 4920154000 Shrinkable Tube 5 41 5810004000 Tapping Screw 2 42 Tapping Screw 4 43 5610012000 Tapping Screw 12 44 5610013000 Tapping Screw 2 45 5810024000 Tapping Screw 2 46 5820176000 Screw With Washer 4 47 5680249000 Washer 1 48 5680018000 O Ring 1 30261 manual Re
Your Home For troubleshooting, product manuals and expert advice: @ manageability www. micromanagement For repair — in your home — of all major brand appliances, . lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.
