Manual

NOTE: Sharp corners and small grooves will onlybe partially
duplicated by the copy crafter.The follower assembly will
need to be removed. Using calipers, transfermeasurements
from originalto duplicate, and clean up grooves and corners
using fine adjustment screwon carriage.
MISCELLANEOUS OPERATIONS
• The copy craftercan also be used to taper workpieces.To
dothis, offsetthe tool rest bases.
• The copy craftercan be mounted acrossthe bed for copying
of bowls,cups, etc. by repositioningtoolrest bases.
• The copy craftercan trace a templateas well as an original
spindle.
• The template representsthe profileof the postmeasured
from its centedine.
• The measurements of the post are transferredto a suitable
material such as '/," plywood laidout and cuton a band,saw
or scrollsaw.
• The template is then bolted tothe pattern supports,parellel
to the lathe bed.
• Figure 12 on page 7 showsan example br usinga template.
WARNING: Make certain that the lathe is disconnectedfrom
power source before attemptingto service or remove any
component.
CLEANING
Keep machine and workshop clean. Do not allow sawdustto
accumulate on the tool.
Use soap and water to clean painted parts, rubber parts and
plastic guards.
LUBRICATION
The shielded ballbearings in this tool are permanently lubri-
cated at the factory. They require no further lubrication.
KEEP TOOL IN REPAIR
Replace any damaged or missing parts. Use parts listto
order parts.
=19.05 [07'5] _4L628 [1.641
¢I6 724 COGG]
[1 3]
43778 [172]
28 8134
t2.7 [0.50_
¢,11112 [0441 ,_292] [115]
¢34 '925 [1373
'a40005 C157]
_32.004 [1.26]
,1,27 94 [1¸101
_ 16064 [063]
_2794 _110_
,_29.2_ It 1_3
\
/-
64991 [2.561
132 678 [5_2]
156.078 [(= 22]
] 75.26 [6903
182_8 [720]
199¸689 [786_
2197t [865]
Z268_t [869J
224 79 [8853
m254 c]oo]
37.8_4 C149_
=190_ [0751
[020]
127 C0503
_8.5 [0.335]
.19.05 [0.75] 19.05 C0.7 I W [.,_
Figure 12 - Using a Template
250.19 [9,85]
7