Operator`s manual

KNOW YOUR SAW
RF.AD THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERAT-
ING YOUR CHAIN SAW Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual forfuture reference.
Bar OilFillCap Housing Fuel Mix FillCap
Cylinder Cover [1
FastIdle FL,JI
ThrottleL k
--,----- _ J t/_ Screw _ ulreCtlOn
_-.,-.,---- .,,.,- GuideBar "
Throttle Choke -- . BarClampNuts ui ear
T"ggorK.obBarO,amp
ON/STOPSWITCH
TheON/STOPSwitchisusedtostop
theengine.
THRO'rFLETRIGGER
The throttletriggercontrolsengine
speed.
THROTTLE LOCKOUT
The throttlelockoutmustbe pressed
beforeyoucansqueezethe throttletrig-
ger.Thisfeature preventsyou from ac-
cidentallysqueezingthetdgger.
FASTIDLELOCK
The fast idle lockholdsthethrottletrig-
gerinthestartingposition.Activatethe
fast idlelockbypressingthethrottle
lockoutandsqueezingthethrottletrig-
ger.Withthethrottletriggersqueezed,
pressthefast idle lock.Releasethe
throttle lockout and trigger while holding
the fast idle lock button.
CHOKE KNOB
The Choke Knob activates the choke to
dprovideadditional fuel to the engine
uring cold starting.
PRIMER BULB
The Primer Bulb circulates fuel to the
carburetor to provide quicker starting.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tenston fre-
quently, See Chain Tension under the
Service and Adjustments section.
6