Operator`s manual

Direction
Edging
MOWING
Your trimmer is ideai for mowing in
places conventional lawn mowers
cannot reach. In the mowing position,
keep the line parallet to the ground.
Avoid pressing the head into the
ground as this can scalp the ground
and damage the tool.
Mowing
SCALPING
The scalping technique removes un-
wanted vegetation down to the ground.
Hold the bottom of the trimmer head
about 3 inches (8 cm) above the
ground and at an angle. Allow the tip of
the line to strike the ground around
trees, posts, monuments, etc. This tech-
nique increases line wear.
so,lpi, g I g
CUSTOMER RESPONSIBILITIES
SWEEPING
The fanning action of the rotating line
can be used for a quick and easy
clean up. Keep the line parallel to and
above the surfaces being swept and
move the toot from side to side.
WARNING: Disconnect power source before performing maintenance.
CARE & MAINTENANCE TASK WHEN TO PERFORM
Check for loose fasteners and parts Before each use
Check for damaged or worn pa_ts Before each use
Inspect and clean unit and labels After each use
GEN ERAL RECOM MENDATIONS
The warranty on this unit does not
cover items that have been subjected
to operator abuse or negligence, To
receive full value from the warranty,
the operator must maintain unit as
instructed in this manual, Various ad-
justments wilt need to be made peri-
odically to properly maintain your unit,
BEFORE EACH USE
CHECK FOR LOOSE
FASTENERS AND PARTS
• Housing Screws
• Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact a Sears Service Center for
replacement of damaged or worn
parts.
12