Operating instructions

KNOW YOUR BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with locations
of the various controls and adjustments. Save this manual for future reference.
Blower Tube
\
Prmer Bu b _._ ,',_'_'_%,_. Fue Cap
..... _,,,,j>,
Throttte Lever _ __
Che e
Lever
THROTTLE LEVER
The throttle lever is used to select the
desired engine speed and to stop the
engine. To stop engine, move the
throttle lever to the STOP position.
PRIMER BULB
The PRIMER BULB removes air from
the carburetor and fuel lines and fills
them with fuel, This allows you to start
the engine with fewer pulls on the
starter rope. Activate the primer bulb
by pressing it and allowing it to return
to its original form.
CHOKE LEVER
The CHOKE helps to supply fuel to the
engine to aid in cold starting, The
CHOKE OFF position is used for full
speed operation. The 1/2 position is
used for a brief initial warm-up period
and to set the engine at idle speed.
OPERATING TIPS
• Operate power equipment only at rea-
sonable hours-not early in the morn-
ing or late at night when people might
be disturbed. Comply with times listed
in local ordinances Usual recommen-
dations are 9:00 am to 5:00 pm.,
Monday though Saturday
• To reduce noise levels, operate pow-
er blowers at the lowest possible
throttle speed to do the job
• To reduce noise levels, limit the num-
ber of pieces of equipment used at
any one time.
• Use rakes and brooms to loosen
debris before blowing.
• In dusty conditions, slightly dampen
surfaces or use a mister attachment
when water is available.
• Conserve water by using power blow-
ers instead of hoses for many lawn
and garden applications, including
areas such as gutters, screens, patios,
grills, porches, and gardens
• Watch out for children, pets, open
windows, or freshly washed cars.
Blow debris away safely.
• Use the full blower nozzle extension
so the air stream can work close to
the ground.
• After using blowers and other equip-
ment, CLEAN UP! Dispose of debris
in trash receptacles.
BEFORE STARTING ENGINE
_WARNING: Be sure to read tile
fuel information in the safety rules
before you begin If you do not
understand the safety rules, do not
attempt to fuel your unit. Call
1-800-235-5878.
FUELING ENGINE
_kWARNING: Remove fuel cap
slowly when refueling.
This engine is certified to operate on
unleaded gasoline Before operation,
gasoline must be mixed with a good
quality synthetic 2-cycle air-cooled
engine oil. We recommend Craftsman
brand synthetic oil Mix gasoline and
oil at a ratio of 40:1 (A 40:1 ratio is
obtained by mixing 3.2 ounces of oil
-5-