Operator`s manual

SEARS BLOWI=R PARTS LOST -- MODEL 358.796920
Figure 1
KEY PART
KEY PART CITY, DESCRIPTION QTY, DESCRIPTION
NOo NO. NO. NO,
1 10828 1 Ass'y - Handle(Incl #2) 31 26776 1 Deflector- Heat
2 15635 2 Screw - 10- 14 x 11116Bind, Hd- 32 10824" 1 Shroud - (Incl #12 & 45)
Handle 33 10835 1 Ass'y- Blower Hsg (IncL 9 of#38)
5 24256 3 Isolator - Handle 34 94215 1 Impeller
6 15343 1 Spacer - Isolator (Front) 35 15661 1 Screw - 10- 14 x 88 -
7 26163 6 Cup - Isolator Blower Hsg/Inlet Door
8 15629 2 Washer #8 - Front 37 15064 1 Nut - 10- 24
g 15628 2 Screw - 8 - 32 x 7/16 Rind Hd - 38 15367 10 Screw - 10 - ! 4 x 3/4
Fan Hsg/Crankcase Pivot Pin/Blower Hsg
10 15561 2 Screw- 12- 11x 2 39 15644 1 Nut - Impeller
11 15342 2 Spacer - Isolator (Rear) 40 15441 ! Washer +Conical - Impeller
41 15626 1 Washer- Flat- Impeller
12 32091 * 1 Bearing-Ball (Shroud) 42 15632 4 Screw - 1/4- 20 x 7/8 +
13 15678 2 Screw - 10+24 x 5/8 Bind Hd + Blower Hsg/Shroud
Fan Hsg/Crankcase 43 15682 4 Washer - Blower Hsg/Shroud
14 24371 1 Air Filter
15 15676 4 Screw- 10 - 24 x 7/8 - Fan Housing 44 15168 4 Screw- 10+24 x5/8-
16 15677 4 Washer - Fan Hsg Shroud/Crankcase
17 10821 1 Fan Housing 45 1516 1 Retainer-Bearing-Shroud
18 42023 1 Spring - Starter Pulley 46 15667 1 Spring - Tension (Right)
19 26780 1 Baffle - Air 47 15647 ! Pin - Pivot
20 28626 1 Pulley Starter 48 15672 1 Spring - Tension (Left)
21 15479 1 Screw +10 - 3/4 Hex Hd +Pulley 49 94241 1 Ass'y - Inlet Door
22 15123 1 Washer - Starter Pulley 50 15638 1 Screw - 1/4 x20 1/2 - Retainer
23 15544 4 Screw - 10 x 3/8 Pan Hd - 51 !5637 1 Retainer +Fuel Tank
Air Baffle 52 26781 1 Cushion - Fuel Tank
24 22289 1 Rope (3 ft ) 53 91678 1 Ass'y - Fuel Pick-up
25 26735 1 Handle - Starter Rope 54 21058 1 Line - Fuel - Tank
27 15664 1 Bolt - 1/4 - 20 x 1-1/2- Clamp 56 10729 1 Ass'y - Fuel Cap w/Retainer
28 94222 1 Clamp - Blower Tube 57 10615 1 Ass'y - Fuel Tank
29 94242 ! Knob - Clamp (Incl #53, 54 & 56)
30 15636 3 Screw -10 - Heat Deflector DECALS
101 26778 1 Decat- Instruction
102 26777 2 Decal - (Left & Right) Fan
Housing
103 26925 1 Deca_- Warning-Blower Hsg
Key Nos+Excluded: #3, 4, 26, 36 & 55
*When removing or installingthe bearing (#32091), the area of the shroud (#10824) receiving the bearing must be heated to
approximately 3000E to avoid damaging the shroud
15