Manual

IMPORTANT
Experienceindicatesthatalcohol
blendedfuels(calledgasoholorusing
ethanolormethanol)canattractmois-
turewhichleadstoseparationand
formationofacidsduringstorage.
Acidicgascandamagethefuelsys-
temofanenginewhileinstorage.To
avoidengineproblems,emptythefuel
systembeforestoragefor30daysor
longer.Drainthegastank,starttheen-
gineandletitrununtilthefuellinesand
carburetorareempty.Usefreshfuel
nextseason.Neveruseengineorcar-
buretorcleanerproductsinthefuel
tankorpermanentdamagemayoc-
cur.SeetheSTORAGEsectionfor
additionalinformation.
HOWTOSTOPYOUR UNIT
• To stop the engine, move the
ON/OFF switch to the OFF position.
"__ ON/OFF
witch
Throttle Tr_igg_er_"
HOW TO START YOUR UNIT
.,& _
_WARNIN_I: The trimmer head
will turn while starting the engine.
Avoid any contact with the muffler. A
hot muffler can cause serious burns.
NOTE: DO NOT squeeze the throttle
trigger until the engine has started and
runs.
1. Set unit on a flat surface.
2. Move ON/OFF switch to the ON
position.
3. Slowly press the primer bulb 6
times.
4. Move the start lever to the START
position.
Start Lever
Muffler
Primer Bulb
5. Pull starter rope handle sharply
until engine starts and runs.
6. Allow unit to run for 10-15 seconds,
then fully squeeze the throttle trigger
to disengage the starting system.
OPERATING THE COUPLER
This model is equipped with a coupler
which enables optional attachments to
be installed. The optional attach-
ments are:
Edger ................. 358.792400
Cultivator .............. 358.792410
Blower ................ 358.792421
Brushcutter ............ 358.792430
WARNING: Always stop unit
and disconnect spark plug before re-
moving or installing attachments.
11