IMPORTANT MANUAL Do Not Throw Away Operator's Manual @ Model No:. :::: 358i798660 '_ ASSISTANCE 1-800-235-5878 ! Always Wear Eye Protection SE_A/,qS/CRR FTSMRNo ELECTRIC HEDGE TRIMMER _k WARNING: Read the Operator's Manual and Follow All Warnings and Safety Instructions. Failure To Do So Can Result in Serious Injury. Sears, 530-082628-05/05/94 Roebuck DOUBLE INSULATED • Assembly • Maintenance • Operation • Repair and Co.
FULL CRAFTSMAN TWO YEAR WARRANTY ON.SEARS BEST BRUSHWACKER ® ELECTRIC HEDGE TRIMMER If this Craftsman Brushwacker Electric Hedge Trimmer fails to perform properly due to a defect in material or workmanship within (2) two years from the date of purchase, Sears will repair or replace it, free of charge. WARRANTY SERVICE IS AVAILABLE BY RETURNING THE HEDGE TRIMMER TO THE NEAREST SEARS STORE IN THE UNITED STATES.
A WARNINGS AND SAFETY INSTRUCTIONS A WARNING: When using electric hedge trimmers, basic safety precautions should always be followed to reduce the risk of floe, electric shock, and personal injury. Read all instructions (see additional safety instructions throughout this manual). Ak DANGER - THIS POWER TOOL CAN BE DANGEROUS! This unit can cause serious in- jury including amputation or blindness to the operator and others. The warnings and saf.ety "instructions ".
WARNINGS A OPERATOR AND SAFETY INSTRUCTIONS....(Continued) SAFETY 1. DANGER--RISK OF CUT--KEEP HANDS AWAY FROM BLADES--KEEP BOTH HANDS ON HANDLES WHEN POWER IS ON. Do not attempt to clear away cut material when the blade is in motion. Make sure the trigger switch is not engaged and the power source is disconnected when removing jammed material from the blades. Do not grab or hold the unit by the blades. 2. DRESS PROPERLY--Always wear eye protection. Always wear heav_, long pants, boots, and gloves.
II I II / rl I I r / " I I r fl '- _ ..................... ..... KNOW YOUR UNIT B. UNPACKING A. INTRODUCTION Your unit will trim hedges precisely and nsatl_ Speeia! FeatUres InClude. • Hsnd_ci " • Comfortable Assist Hamile • • Four Finger Trigger Double Insulated • Trigger Switch Lock-out INSTRUCTIONS 1. After removing the co_t_'fr_m _l_._<)il!,_b_k the parts.against the Carton C(mtents list., 2. Examinethepar_sfor'damagg_ par_s_. Db'u_tu_damaged . 3.
ASSEMBLY " If unit is received assembled, repeat all steps in this section to be sure assembly t is correct. PREPARATION This Operator's Manual is designed to help you assemble the tool and to provide its safe operation. It is important that you read the entire manual to become familiar with the tool before you begin assembly. If you have any questions or need further assxstanco, call our CUSTOMER ASSISTANCE HOTLINE at 1-800-235-5878. The only tool needed for assembly A.
PRE. OPERATION CHECKS A WARNmG .Re.wew all Warnings this manual. and Safety 2. Use only SEARS specified cutting blades, See "Specifications." 3. Use only genuine SEARS accessories. 4. Have your SEARS Service Center replace damaged parts or cutting blades that are bent, warped, cracked, broken, or damaged in any other way before using the unit. J Instructions in_ Before operating your unit, always: 1. Inspect the entire unit, including guards and cord, before each use.
US G YOUR:UNiT A DANGER- THIS POWER UNIT CAN BE DANGEROUSX This linit can cause serioiis i_ijury _ncluding amputation or blinclness to the operator and others. The warnings and safety instructions in this manual must be followed to provide reasonablesafety and efficiency-inusingthis unit. The operator is respons_le for follow!ng the warmngs and mstructloas m this manual and on the umt.
,C. TRIMMING METHODS NOTE'. Always keep the extension cord behind you when using the unit. Never drape the cord ever e hedge or bush being trimmed. If the cord gets cut or otherwise damaged, unplug it from the power source before inspection or repair is performed. A B Do not try to cut stems larger than 3/8" thick, 1. TOP CUTTING a. For New or Young Growth: When tMmming new or young growth, use a wide. sweeping motion. Figure 7 A.
CUSTOMER RESPONSIBILITY A. MAINTENANCE - General SAFETY 1. Maintain _ the unit mended procedures, according to 3. Disconnect tenance. recom- MAINTENANCE 1, WARNING Always have your. SEARS Service Center replace a blade that .is bent, warped, cracked, broken, or damaged m any other way. Never attempt to straighten au..d re-use a damaged blade. Use only the specified replacement blade• I CAUTION: I Wear protective gloves diing or performing maintenance ting blades to help avoid injur_ 2.
• NOTES -1t -
The Model Number will be found below the top handle with the Serial Number. Always mention the Model Number when requesting service or repair parts for your unit. All parts listed herein may be ordered and most Sears Stores. Operator's Manual from any Sears Service Center WHEN ORDERING REPAIR PARTS ALWAYS GIVE THE FOLLOWING INFORMATION AS SHOWN IN THIS LIST: 1. The PART NUMBER 3. The PART DESCRIPTION 2. The MODEL 4. The NAME OF ITEM -- NUMBER 358.
