Professional 21 in. Walk Behind Mower Model Owner's Manual

MA, rE.,NCESCNEDU'E
AS YOU COMPLETE _/"__'_2 _0_"__'_ .....
REGULAR SERVICE
Check for Loose Fasteners _ _/
Clean/Inspect
Grass Catcher
i
! t,/ V' t,/
(_fEquipped)
i clean Lawn MOwer t/' _/
O clean Under Drive Cover
(power-Propelled Mowers) IV/
Check ddve bell] ulleys
E (Power_Propell_lPaowe rs) I_'
Check/Sharpen/Replace Blade ¥/_
Lubrication Char _
Clean Baltery/Rechar_
Electric Star Mowers 11/' 11_4
E Check Engine Oil Level
N Change Engine OII fell,z
G Clean AJrFilter I_ z
I Inspect Muffler
N Clean or Replace Spark Plug V /
E Replace Air Filter Paper cartridge Mez
1 - ChangernoceoRenwhen cperating undera beery bad or inhigh _ t;*_entter_pefatufee=.
2 * Servicent_e ellen whereopecatlngin dkty (x 6tmty co_Ji_ons.
3 * _ bladn mm'e oftenwl',enn m,,vinginsandy sc*l,
4 - Ch_ge 48 hou_ at end _f e,eaec_,
GENERAL RECOMMENDATIONS
The warranty on this lawn mower does
not cover items that have been subjected
to operator abuse or negligence. To
receive full value from the warranty,
operator must maintain mower as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
unit,
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season,
Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A now spark
plug and clean/new air filter element
assure proper air-fuel mixture and help
your engine run better and last longer.
Follow the maintenance schedule in
this manual.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
(_ eachwheel)
Engine oil
Mulcher
doorhinge
pin
Rear door
hinge
10
(_ Handle bracket mounting pins
(_) Spray lubricant
_) See "ENGINE" in Maintenance section.
IMPORTANT: Do not oil or grease
plastic wheel bearings, viscous lubri-
cents willattract dust and dirtthat will
shorten the life of the self-lubricating
bearings. If you feel they mustbe
lubricated, use only a dry, powdered
graphite type lubricant sparingly.