Owner`s manual

ManualsBrandsCraftsman ManualsPower Tools390.2511

TROUBLESHOOTING CHART

SYMPTOM CORRECTIVE ACTION

Leaks at the metal

clamps

Release all pressure

in system before

working on clamp!

POSSIBLE CAUSE(S)

1. Loose clamps or O_Ring

not sealed

1. First check the clamp tightening screw to see flit is tight. If it is tight and

slight leakage still occurs, place a piece of wood on the clamp and

firmly tap the wood with a hammer. Repeat tl_s operation around

the edge of the clamp and retighten the clamp screw. If leak continues,

disassemble clamp and pump halves and check to see _at O-Ring is

properly seated and no foreign material is on O-Ring or O seat.

Reassemble pump.

Type of

System

Shallow

Well

2" Single

Pipe

3" Single

Pipe

4" Double

Pipe

Jet Pkg.

Stock No.

29650

2967"t

29902"*t

29660***

Pump

Model No.

390.2511

Pump Performance

at 40 PSI Discharge Pressure

1/2

8.2

(In Gallons Per Hinute)

Pumping Depth in Feet

10 15 20 30

7.3 6.2 5.0

3.4

4.1

40 50

2.8 2.3

3.2 2.0

3.2 2,0

60 70

1.8 1.3

1.2

Use 160 PSI Min. Rating Plastic Pipe.

* Jet Package No. 2967 - 2" Single Pipe (use 1-1/4" galvanized pipe).

** Jet Package No. 29902 - 3" Single Pipe (use 1-1/4" galvanized pipe).

*** Jet Package No. 29660- 4" Double Pipe.

t Must be ordered through Sears Product Service, 1-800-366-7278.