Owner's Manual

5
If connected to a circuit protected by fuses, use time-delay
fuses with this product.
To reduce the risk of electric shock, do not expose to rain.
Store indoors.
Inspect the tank yearly for rust, pin holes, or other
imperfections that could cause it to become unsafe. Never
weld or drill holes in the air tank.
Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance or
footing and may become damaged.
Usetheaircompressoronlyforitsintendeduse.Do
not alter or modify the unit from the original design or
function.
Always be aware that misuse and improper handling of
this tool can cause injury to yourself and others.
Neverleaveatoolunattendedwiththeairhoseattached.
Donotoperatethistoolifitdoesnotcontainalegible
warning label.
Donotcontinuetouseatoolorhosethatleaksairor
does not function properly.
Always disconnect the air supply and power supply before
making adjustments, servicing a tool, or when a tool is not in
use.
Donotattempttopullorcarrytheaircompressorbythe
hose.
Yourtoolmayrequiremoreairconsumptionthanthisair
compressoriscapableofproviding.
Always follow all safety rules recommended by the
manufacturer of your tool, in addition to all safety rules
for the air compressor. Following these rules will reduce the
risk of serious personal injury.
Neverdirectajetofcompressedairtowardpeopleor
animals. Take care not to blow dust and dirt towards
yourself or others. Following this rule will reduce the risk of
serious injury.
Protect your lungs. Wear a face or dust mask if the operation
is dusty. Following this rule will reduce the risk of serious
personal injury.
Donotusethisaircompressortospraychemicals. Your
lungs can be damaged by inhaling toxic fumes. A respirator
may be necessary in dusty environments or when spraying
paint. Do not carry while painting.
Inspect tool cords and hoses periodically and, if
damaged,haverepairedataqualiedservicecenter.
Constantly stay aware of cord location. Following this rule
will reduce the risk of electric shock or re.
Neveruseanelectricaladaptorwiththisgroundedplug.
Check damaged parts. Before further use of the air
compressor or air tool, a guard or other part that is
damaged should be carefully checked to determine
that it will operate properly and perform its intended
function.Checkforalignmentofmovingparts,binding
ofmovingparts,breakageofparts,mounting,andany
other conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired or
replacedbyaqualiedservicecenter. Following this rule
will reduce the risk of shock, re or serious injury.
Makesureyourextensioncordisingoodcondition.
Whenusinganextensioncord,besuretouseoneheavy
enough to carry the current your product will draw. A wire
gaugesize(A.W.G.)ofatleast14isrecommendedforan
extensioncord50feetorlessinlength.Acordexceeding
100feetisnotrecommended.Ifindoubt,usethenext
heaviergauge.Thesmallerthegaugenumber,theheavier
the cord. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating.
Savetheseinstructions. Refer to them frequently and use
them to instruct others who may use this air compressor. If
you loan someone this tool, load them these instructions also.
CAUTION