Operator’s Manual 4-Cycle Electric Start Capable HANDHELD BLOWER Model No. 316.794611 CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions. • SAFETY • ASSEMBLY • OPERATION • MAINTENANCE • ESPAÑOL, P. 21 Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our website: www.craftsman.
TABLE OF CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• IMPORTANT SAFETY INSTRUCTIONS • READ ALL INSTRUCTIONS BEFORE OPERATING WHILE OPERATING • When using the unit, all safety WARNING: instructions must be followed. Please read these instructions before operating the unit in order to ensure the safety of the operator and any bystanders. Please keep these instructions for later use. • • • • • • • • • • • • • • Read the instructions carefully. Be familiar with the controls and proper use of the unit.
BLOWER SAFETY OTHER SAFETY WARNINGS • • • • • • • • • • • • Do not insert anything into the air openings, blower tube or nozzle. Do not operate the unit if any of the air openings or tubes are blocked. Keep the air openings free from dust, lint, hair and anything else that may reduce airflow. Do not operate the unit without the blower tube securely attached. Do not use the unit to spray liquids, especially flammable or combustible liquids, such as gasoline.
• SAFETY & INTERNATIONAL SYMBOLS • This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING SYMBOL • SAFETY ALERT SYMBOL MEANING • ON/OFF STOP CONTROL Indicates danger, warning or caution. May be used in conjunction with other symbols or pictographs.
WARRANTY CRAFTSMAN LIMITED WARRANTY FOR TWO YEARS from the date of sale, this product is warranted against defects in material or workmanship. WITH PROOF OF SALE, a defective product will receive free repair or replacement at option of seller. For warranty coverage details to obtain free repair or replacement, visit the web page: www.craftsman.com/warranty This warranty covers ONLY defects in material and workmanship.
KNOW YOUR UNIT APPLICATIONS • Handle Cleaning yards, garages, driveways, porches, patios, around walls, fences and more On/Off Switch ASSEMBLY TOOLS REQUIRED: • Throttle Control Flat-head Screwdriver Cruise Control Starter Rope Grip Upper Blower Tube Spark Plug Cover Air Filter Cover Muffler Oil Fill Plug Nozzle Primer Bulb Choke Lever Curved Lower Blower Tube Speed Start™ Port Fuel Cap SPECIFICATIONS* Engine Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASSEMBLY WARNING: To avoid serious personal injury and damage to the unit, shut the unit off before removing or installing blower tubes or nozzles. Handle Slots Bumps Blower Outlet WARNING: To prevent serious personal injury, never operate the unit without the upper blower tube firmly installed. Upper Blower Tube INSTALLING THE BLOWER TUBE(S) AND NOZZLE Fig. 1 Always install the upper blower tube. The nozzle and curved lower blower tube are optional. Installing the Upper Blower Tube Bump 1.
OIL AND FUEL USING THE RIGHT OIL Use a high-quality SAE 30 weight oil. DO NOT use dirty oil. Failure to use clean oil of the correct type can cause premature engine wear and failure. ADDING OIL: INITIAL USE Oil Fill Plug WARNING: OVERFILLING THE CRANKCASE MAY CAUSE SERIOUS PERSONAL INJURY. Check the oil level before each use. The importance of maintaining the proper oil level cannot be overemphasized. Change the oil according to the Maintenance Schedule.
FUELING THE UNIT WARNING: Gasoline is extremely flammable. Ignited vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the area. WARNING: Remove the fuel cap slowly to avoid injury from fuel spray. Never operate the unit without the fuel cap securely in place. WARNING: Add fuel in a clean, well ventilated outdoor area. Wipe up any spilled fuel immediately.
STARTING AND STOPPING WARNING: Operate this unit only in a well-ventilated outdoor area. Carbon monoxide exhaust fumes can be lethal in a confined area. On ( I ) Off (O) Throttle Control WARNING: Avoid accidentally starting the unit. To avoid LO (slow) Cruise Control serious injury, the operator and the unit must be in a stable position when pulling the starter rope (Fig. 8).
USING THE SPEED START™ ACCESSORY Item No. This unit can be started with an optional Speed Start™ accessory (items sold separately). Please refer to the Speed Start™ accessory operator’s manual for the proper use of this feature. Please contact your local Craftsman retailer, call 1-888-331-4569 or visit www.craftsman.com for more information. Description 316.85951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Plug-In Power Start 316.85952 . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATION WARNING: To prevent serious personal injury, never operate the unit without the upper blower tube firmly installed. Handle WARNING: Always wear eye, hearing, hand, foot and body protection to reduce the risk of injury when operating this unit. Wear a face mask or dust mask if the operation is dusty. Air Intake HOLDING THE UNIT • • • Fig. 10 Stand in the operating position (Fig. 10). Stand up straight. Do not bend over. Keep feet apart and firmly planted.
MAINTENANCE MAINTENANCE SCHEDULE WARNING: To avoid serious personal injury, always stop the engine and allow it to cool before cleaning or maintaining the unit. Never perform cleaning or maintenance while the unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally. Perform these required maintenance procedures at the frequency stated in the table. These procedures should also be a part of any seasonal tune-up.
CHANGING THE OIL Change the oil while the engine is still warm. The oil will flow freely and carry away more impurities. 1. Clean the area around the oil fill plug (Fig. 11) to prevent debris from entering the oil fill hole. 2. Unscrew the oil fill plug. 3. Tip the unit vertically to pour the oil out of the oil fill hole and into a container (Fig. 13). Allow ample time for complete drainage. NOTE: Dispose of the old oil according to federal, state and local regulations. 4.
MAINTAINING THE SPARK PLUG Spark Plug Cover 1. Stop the engine and allow it to cool. 2. Open the spark plug cover (Fig. 16). Grasp the spark plug boot firmly and pull it from the spark plug. 3. Clean around the spark plug. Remove the spark plug from the cylinder head with a 5/8-inch socket, turning counterclockwise. WARNING: Do not sand blast, scrape or clean spark plug electrodes. Grit in the engine could damage the cylinder. 4. Inspect the spark plug.
CLEANING AND STORAGE CLEANING STORAGE • WARNING: To avoid serious personal injury, always stop the engine and allow it to cool before cleaning or maintaining the unit. • • • • Use a small brush to clean the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic. Wipe off any moisture with a soft cloth. Never store a fueled unit where fumes may reach an open flame or spark.
TROUBLESHOOTING PROBLEM SOLUTION THE ENGINE WILL NOT START The fuel tank is empty Fill the fuel tank with fresh fuel The primer bulb was not pressed enough Press the primer bulb 10 times The fuel is old (over 30 days) Drain the fuel tank and add fresh fuel The spark plug is fouled Replace the spark plug The engine is hot Refer to the IF...
REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That’s when having a Repair Protection Agreement can save you money and aggravation.
NOTES 20