Owner's Manual

STEP 9: (SEE FIGURE 9)

• Attach the upper and lower hopper tubes together

using two 3/8 x 1/2" clevis pins (20) and small hairpin

cotters (19).

FIGURE 10

STEP 11: (SEE FIGURE 11)

• Slidethebagframetube(1)throughthefrontapof

the hopper bag.

STEP 12: (SEE FIGURE 12)

• Insert the hopper support rods (11) into the holes of the

upperhoppertube.Then,exandinserttherodsinto

the holes in the bottom rear hopper tubes.

FIGURE 9 FIGURE 11

FIGURE 12

STEP 10: (SEE FIGURE 10)

• Slide the hopper tubes into the hopper bag.

holes point down

holes point up